Parts for Old Tractors
Click Here or call 800-853-2651
TRACTOR  PARTS TRACTOR  MANUALS

Antique International / Farmall Tractor: Farmall C

[Farmall C Parts]     [Return to the Shed]

The tractor pictured was built in 1949. Early versions of this model came with a C-113 engine, later versions came with a C-123 engine. Some of the special features available for it were the fast hitch, touch control, adjustable front axle and various deluxe seat combinations.

Farmall C Tractor


Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

cheryl miller wrote on Saturday, May 25, 2013 (PDT):
  • I have a c farmall and I need to know how much it is worth.
    Hank D-NM wrote on Saturday, May 18, 2013 (PDT):
  • My Super C just cracked the block behind the carb, over the winter. I thought I had drained everything beforehand. I have read this is a problem with this tractor. Can it be welded or the block replaced easily Please advise. Hank D, NM
    brandon wrote on Thursday, June 07, 2012 (PDT):
  • i have a farmall super c serial on seat toolbox is model fc serial#110983 engine serial# 354898R1 cylinder head serial # 251172R1 my question is this a super c block and is the head a super c head and also there is no water pump so is this a super c tractor or just a regular c
    John Pfennig wrote on Tuesday, May 29, 2012 (PDT):
  • Do you still have this tractor I know helmuth had a large number of tractor s he had restored at Great Grandpa John Pfennig s home, I haven t been up there in a number of years. Do you know if he is still up there and what he is doing with all those tractors
    Don wrote on Sunday, January 29, 2012 (PST):
  • Do you know what the compression is supposed to be set at for the 1949 Farmall C. I am restoring one now. Serial # 29187
    Michael Eckert wrote on Sunday, January 29, 2012 (PST):
  • I would like to know what color the shutters and fan blades should be on a 1949 C. I thought the starter and radiator are black and thought maybe the shutters should be too
    John Wills wrote on Tuesday, May 17, 2011 (PDT):
  • I have a Farmall Super C that I would like to find a home for. Complete tractor in good condition with hydraulic accessories. Location is Temecula, CA
    Ken Gardner wrote on Thursday, May 12, 2011 (PDT):
  • I have rebuilt farmall C with wide front end so nice , tuke hyd. off my super C put on my C , allso have 2 H, M, A. and have a BN for parts if anyone needs any thing, Ken Reed Creek N.Y.
    Leonard Parker wrote on Wednesday, February 16, 2011 (PST):
  • I have just placed an ad on Craigslist to sell my McCormick Farmall Super C. Basically selling it for parts or restoration fun for someone else.
    tony wrote on Monday, January 10, 2011 (PST):
  • i recently bought a farmall to restore not sure if it is a c or super c serial# is 115274 model is fc and what year it is.thanks for any info.
    Don Hanvey wrote on Friday, January 07, 2011 (PST):
  • Where can I find info. on installing a belly mower on my super c
    Trent Spivey wrote on Friday, July 30, 2010 (PDT):
  • I recently acquired a farmall C tractor with several pieces of equipment, I am having a hard time finding what year this tractor is by the serial number, can anyone help me.... the serial number of the plate is 45087.. thanks Trent
    Conner wrote on Thursday, July 15, 2010 (PDT):
  • Ihave a super C #351162-p1, runs good, been in barn for the last fifteen years, tires are ok........what is something like this worth
    rencent inheritor wrote on Tuesday, February 09, 2010 (PST):
  • i have fallen in love with my inherited C but am unable to find any others! do i have a one of a kind
    JR wrote on Wednesday, January 27, 2010 (PST):
  • I have a Farmall Super-C, Serial FCS-157-102, Engine; FMC-HA5-G, Carb;0653-7715A. It is in running condition and would be great for using on a small farm and/or a restoration project. Also have documentation and original bill of sale. What is the sale price range
    THOMAS W THORN wrote on Monday, October 05, 2009 (PDT):
  • I HAVE A 1950 FARMALL C SN 53805 CASTING CODE 351132-R1 2 -10-T L NO1 IT HAS WHITE PAINT UNDER THE RED CAN ANYONE TELL ME IF THIS IS A TRUE DEMENSTRATOR THANKS
    Michael S wrote on Tuesday, June 16, 2009 (PDT):
  • Did the farmall super C have a single front wheel on any models,Thanks,Michael
    jim wrote on Monday, June 08, 2009 (PDT):
  • Just bought a IH C so the Super C with Fast Hitch is for sale. Jim
    Brian wrote on Tuesday, May 26, 2009 (PDT):
  • I just bought a 1951 super C with a 5ft. belly mower and wheel weights i was just wondering if i got a good deal 1400.00 runs great
    Bennie S. wrote on Tuesday, March 03, 2009 (PST):
  • Please tell me if I have a C or Super C Farmall tractor- the serial number is 72667. The engine block has the cast wedge between the carb and the oil pan. I also need the year if possible. Thank you! Bennie
    Stayce wrote on Thursday, February 12, 2009 (PST):
  • Where can I locate technical data for a Farmall FC, i.e., top gear speed Thanks.
    Robert E. Almstrom wrote on Wednesday, January 28, 2009 (PST):
  • I Have 2 of them. One is in need of repairs. I want to change them over to 12 volt systems. The one needing repairs I may sell as a parts tractor. Bob Bob
    Mike Johnson wrote on Wednesday, January 21, 2009 (PST):
  • How much horse power did the c come with
    Mike Johnson wrote on Wednesday, January 21, 2009 (PST):
  • How much horsepower did the c come out with
    allan scott wrote on Sunday, January 04, 2009 (PST):
  • looking for repair manual for 535 ford industrial tractor
    jim c wrote on Wednesday, June 18, 2008 (PDT):
  • just purchased model c 1950 looking for 10-36 tire. prefer used and also farm equipment and does anyone know where to get a 3 point hitch
    Andrew Taylor wrote on Saturday, May 31, 2008 (PDT):
  • All C and super C s had the rockshaft lift. The differences are as follows. 1 The super C can be identified by several things. 2 four rock shafts on the touch control rather than three. 3 Disc brakes, instead of band brakes. The clutch and brake pedals are different. 4 the 123 engine has a small wedge cast into the block directly below and between the carb, and oil pan 5 The clutch plate inspection hole is a different shape 6 The grille, radiator, and gas tank support is taller on the super c 7 the steering wheel is larger 8 Super C s has a touch control temprature gauge
    Lowell wrote on Tuesday, May 27, 2008 (PDT):
  • Looking for a grill for a Farmall C. Can anyone out there help me
    Ronnie Lee wrote on Friday, April 11, 2008 (PDT):
  • My Mother recently passed away and I now have the opportunity to sell the tractors. She had a C and a Super C and also an F-12 or F-20. I m not sure until I locate the serial # because I understand that this is how I can tell. The C is in working order because I recently used it to haul wood that I cut for her wood stove. The Super C had the cap knocked off and probably took water in. There is also the bars and some equipment that fits them. I need a reliable buyer for these but am not out to rip anyone off. If interested I live in Sedalia Missouri and if you call, I can call you back because I have unlimited calling so we can discus these and where to find the serial numbers and then I can send digital photos. Thanks in advance,Ron Lee
    Tyler Ruth wrote on Wednesday, March 26, 2008 (PDT):
  • I am 16 years old and was looking to buy a farmall c tractor. I have limited knowledge about this tractor and tractors in general. In fair condition what is it worth Where and how do I get parts In full reconditioned status what is this tractor worth Any and all information given to me will be appriciated. I am doing this for a school project.
    Earl Taylor wrote on Sunday, February 17, 2008 (PST):
  • I had the pleasure to work for a farmer who started out with a brand new 1952 Super C on his farm. I was just a kid when I started working for him. It had all the implements you could probably get for it, except one that I noticed on a personal web site by Ellsworth Chase and that was the fast hitch disk. We had the same stuff for ours that he has shown except the two-row cultivator set, front and rear. The rear of course was the fast hitch. We did not have an umbrella mount for ours, or the shutters on the grille. But boy looking at the Super C brings back memories. I was there when the farm was sold, the tractor was the last to go. I visited my old boss and when I drove up to his new home where he retired, in the front yard is a two row corn planter in the flower bed from the Super C he kept from the farm. Thanks for the trip down memory lane. E.T.
    Tom Spragg wrote on Sunday, February 17, 2008 (PST):
  • I have the culivator that was on my C when I bought it also the large crank wrench for the front bolts,it still has some of the red and blue paint, on the tool bars ect. want to sell, make me an offer!!!!
    paul ford wrote on Friday, January 04, 2008 (PST):
  • i have a superC my dad and i live in ms we love these old tractors
    Eric Larson wrote on Friday, November 09, 2007 (PST):
  • Jake, I work in the paper industry and the maintenance department has over the years recommended using Aero-Kroil for unsticking anything. This is a product you can buy at most local hardware stores for around 5.00. This oil will penetrate into areas 1/1,000,000th of and inch. I have used it on frozen head bolt studs when nothing else would budge them. I sprayed this on and let it sit for a half hour and the frozen stud came out with ease. Try it you ll like the results.
    Jonathan Turnage wrote on Thursday, November 08, 2007 (PST):
  • I have an antique farmall super A that I would like to sale if anyone is interested. I live in Mississippi and I really need to get rid of it
    phillip wrote on Friday, October 26, 2007 (PDT):
  • try Marvel Mystery Oil for stuck pistons.
    Jake wrote on Tuesday, October 23, 2007 (PDT):
  • I have a super c but the pistons are stuck bad. I tried Coca-Cola but it didnt work any one know how to get them unstuck
    Sharon Haus wrote on Tuesday, September 25, 2007 (PDT):
  • My husband is restoring a C model tractor. Not sure just what year it is. Serial number 14293 or maybe the 1 is really and I. Could you help Thanks
    wayne clayborne wrote on Sunday, August 19, 2007 (PDT):
  • wanted to buy farmall highcrop cv av bv hv mv wayne clayborne mt.vernon ohio 7403922805 7403922800
    Adam Albers wrote on Thursday, July 12, 2007 (PDT):
  • I am looking for a Farmall Super C to restore. If anyone has one that you are selling, drop me a line. My email address is; mario714 at hotmail. com Thanks
    Adam Albers wrote on Thursday, July 12, 2007 (PDT):
  • I am looking for a Farmall Super C to restore. If anyone has one that you are selling, drop me a line. Thanks
    Devin Venters wrote on Thursday, July 05, 2007 (PDT):
  • hello. i recently started to restore a 1949 garmall c model. i was wondering if anybody had any tips or anything about how to do this or where to get the paint and parts. everything is orrigional. we just had the starter rebuilt last summer. please get in touch with me by my e-mail if u have anything useful. thankyou
    houston wilson wrote on Sunday, July 01, 2007 (PDT):
  • i have a farmall c for sale needs restoration 1500.00
    Keith Frost wrote on Tuesday, June 12, 2007 (PDT):
  • I have a C model farmall,completly rebuilt and painted with new decals. Will sell got to many tractors. 2500.00 479-885-3469 Arkansas
    Ken Johnson wrote on Tuesday, June 05, 2007 (PDT):
  • I just recently bought a 1952 Super C with a wide front end on it for 800. Tractor was not running at the time of purchase but my dad and I got it running the same day we brought it home. We are currently enjoying a great father and son restoration project. I am sparing no expense on this restoration as I don t plan on getting rid of my tractor or my memories of this project. I am also currently enjoying the use of my other Farmall tractor, it is a 1950 H. That one was already redone by the previous owner.
    Gid Ware wrote on Monday, June 04, 2007 (PDT):
  • I have restored a Farmall C tractor and am having trouble finding the rubber bushings that go in the seat bracket. Does anyone have a clue where I can find them Thanks.
    Mike Whitacre wrote on Wednesday, May 30, 2007 (PDT):
  • I am looking for a better grill than I have on a 1949 Farmall C. Got any ideas where to look.
    chad albert wrote on Wednesday, May 30, 2007 (PDT):
  • looking for a Farmall c with the serial # 550 call me asap it was my grandfathers and i want it very badly 319 240 3684 thanks
    Dwight Simbro wrote on Wednesday, April 25, 2007 (PDT):
  • I have a C for sale. It has a Super C motor. Think it might be a 1954. It has a 6 foot JD belly finishing mower that needs a gear-box. The tractor has new tires. Runs good. Call 641-898-7346 2000
    Jeff Stevenson wrote on Sunday, April 15, 2007 (PDT):
  • URGENT! Found a Super C for sale. Heres the kicker. Guy told me it used to be white. Looking closely at it...you can definatly see the white peeking through the peeling red. Now, tell me if they ever made a Super C White Demonstrator 815 -252-6777. Jeff
    Clayton Ott wrote on Friday, March 30, 2007 (PST):
  • Brad shoot me an E-Mail. I think that this C would be great to restore. You could even restore the cotton harvester, if not the harvestor is worth a good amount if you just sell the drum and scrap iron. Great tractor underneath though!!
    Clayton Ott wrote on Friday, March 30, 2007 (PST):
  • FOR SALE!!! I have an original Farmall C converted to a cotton harvester. The harvester is still on the tractor. If you are intrested, you can email me. i will send pictures, and and give you information about it. I will be posting it in the classifyed adds soon.
    Glenn Shawl wrote on Wednesday, March 28, 2007 (PST):
  • I have a Farmall C serial # 2012. Can anyone tell me what year it was built.
    Brad. wrote on Wednesday, March 21, 2007 (PST):
  • I have been farming with my father since I was 4 and I have nothing bad to say about Farmall. I just got done restoring a 49H and a 53M. Now I m looking for a C. If you know where to find one for a reasonable price. NOT restored I would love to take it off there hands.
    mike Whiting wrote on Friday, March 16, 2007 (PST):
  • I am 13 years old and I have just bought a super C and i would like to know the HP and the approx year also i would like to know the best way to get the rust out of the tank possible .And if any one has a plow for the old girl i would be interested thnks!!!!!
    Jack Sober wrote on Sunday, March 11, 2007 (PST):
  • I receved my 1951 super c as a gift in 2000. unknowing it had two smashed and beetend pistons.It did not run,so I found a macanic and started to open the can of warms that hapens when you take on this type of prodject.I baut a comeplet engine block,genarater/alternater,starter,points and condencer,distibuter,voltigragulater,battery and all the wires to the lights.After 7 years and 3 moths it is ready for work in the feild and some perades.I have one thing to say to enyone that wants to do this kind of operation you must have paionts,good advisers and most of all money to speand.
    Rich wrote on Wednesday, November 08, 2006 (PST):
  • I can't believe it. This little Farmall C Serial #351132 R-1 is sitting out by our back fence and has been for several years (in the weather). We were clearing out the back fence line today and found it. As I recall it was parked there as part of a bus deal that never happened so I guess ownership falls to me. I have no idea where this tractor started its life but right now its down and out in Utah. If anyone knows anything about this particular C let me hear from you. This abused little critter is worming its way into my heart.
    edward wrote on Thursday, October 19, 2006 (PDT):
  • i just bought a farmal tractor and just have't found out what year it is, but i'll find out soon
    Ethan wrote on Thursday, September 28, 2006 (PDT):
  • I would buy and restore the c.
    sheridan wrote on Wednesday, September 20, 2006 (PDT):
  • Can someone tell me the horse power of a 1951 c model
    Andrew Everett wrote on Wednesday, September 06, 2006 (PDT):
  • i am looking to restore my first tractor which would be a better one to restore i have found a massy harris and a farmall c any comments would be welcomed
    Wally Lidberg wrote on Monday, August 28, 2006 (PDT):
  • I have an air compressor with a four cylinder, International gas engine, with a model number UC 200 and I need a head gasket for it, bolt tightening sequence and bolt torque pounds.
    Ron Gomorczak wrote on Sunday, August 13, 2006 (PDT):
  • I need help. I own a SUPER C without a 3-point hitch.Will this tractor handle any pull type rotary cutter.Also can this tractor handle a hay operation. If so where can I find this equipment. I live in Rhinelander Wi.
    Sheridan Marshall wrote on Monday, July 17, 2006 (PDT):
  • Can anyone out there seid me a picture ir instructions on how to put a original sickle mower onto a 1951 C . I have to tractor with the plow on it but I also have the mower, Also I am trying to get it lisenced but need the value and I have no idea what it is worth . I painted it and put a new carb on . I also have the original front plow , mower and disk . Any help would be apreciated
    David Grimes wrote on Monday, July 10, 2006 (PDT):
  • Here is a stupid question; I found a fully restored super c (not sure of the year) what is a good price to pay? Here is the stupid parts of the question; What is the height, width, and length of most super c?
    Doug Grove wrote on Monday, July 10, 2006 (PDT):
  • I'm with a small nonprofit in central Tennessee that just bought a 1949 Farmall C. We will be cleaning it up and working on a couple of mechanical issues while searching for a mower deck and other implements. If anyone can help with advice, supervision or even hands-on work (the mileage is tax deductible) it would be very greatly appreciated. I can be contacted via the contact page of our web site, www.cumberlandcentre.org. Many, many thanks! Doug
    Karen Park wrote on Monday, July 10, 2006 (PDT):
  • I am looking for a Power Takeoff Belt Pulley for a Farmall C tractor, sorry don't know the year but can find out if needed. Any help with finding parts for this tractor would be appriciated. We have just bought a mower for this and would like to get the parts as soon as possible. Preferable in Canada.
    B Jay M wrote on Wednesday, July 05, 2006 (PDT):
  • Dan Shepherd, a C and a super C are very close. Most of the difference is in the engine displacement. Super C has a bigger engine.
    B Jay M wrote on Wednesday, July 05, 2006 (PDT):
  • Bubba, tell me more about your burned up tractor and the attachments it has, I am interested.
    Mike McGee wrote on Sunday, July 02, 2006 (PDT):
  • larry brown where did you find you parts? I have a 1948 "C" that the front two cylinders froze up. Took them out today and chipped about 1 inch wide by .5 inch tall chunk out of the bottom of the sleeve. Also did you put a water pump on yours?
    Dennis l. Koch wrote on Saturday, July 01, 2006 (PDT):
  • Ihave a Super C that has a hydrolic operated Blade that can be possitioned under the tractor or in front of the tractor. I would like to know if it was an attachment offer by Farmall or aftermarket.
    Bubba wrote on Wednesday, June 28, 2006 (PDT):
  • I live in central Mo buyer mustb pick up
    Bert Cleaves wrote on Monday, June 26, 2006 (PDT):
  • I need a wireing harness for my farmall super c.any idea wher I can get one?
    Bert Cleaves wrote on Sunday, June 25, 2006 (PDT):
  • I have what a farmall super C tractor. It is rare because it has the wide front tires instead od the tires close together. I think it is a 1949 but am not sure. How do you find out how to find the year? Would appriciate anything anyone has to say. Thanks Bert
    Dan Shepherd wrote on Sunday, June 25, 2006 (PDT):
  • Can someone tell me the difference between the C and super C. I bought a C from a friend and he said it was super C but I don't think it is!
    Larry Brown wrote on Thursday, June 01, 2006 (PDT):
  • We have a 1949 Farmall C which I completely overhauled with oversized pistons and made a super C out of it. Everything in the engine has been replaced with new parts. I also put in a new clutch pressure plate and throw out bearing. The tin on it is almost like new. Ididn,t repaint it. Also rebuilt the carbureator. Can anyone tell me what the selling price on this tractor would be?
    Carol Anderson wrote on Monday, May 22, 2006 (PDT):
  • I am looking for decals (not like all the ones I see on Ebay) for my son's 1971 Farmall. He rebuit the engine and painted it a month ago and can not find decals like the ones he removed. The tractor is the cream and yellow one and the decal on the hood was a sticker about 24" long and 4" wide. The top part of the sticker was Red and said INTERNATIONAL AND THE BOTTOM SAID CUB CENTERED IN BLACK WITH FOIL LOOKING STRIPES ON EACH SIDE OF IT. If you can help I can email you a picture of the decals. Thanks. Please contact me at razz at 1st.net.
    david wrote on Wednesday, May 03, 2006 (PDT):
  • I am looking for a replacement fertilizer tube for a farmall super A. anyone know where to find them thanks david
    NANCY MOUSSEAU wrote on Monday, May 01, 2006 (PDT):
  • HOW MUCH DOES A FARMALL CUB FULLY RESTORED SELL FOR. WHAT ABOUT A FARMALL C FULLY RESTORED.
    Mike wrote on Wednesday, March 29, 2006 (PST):
  • I have a farmall 200 and need a set of plows. Will a set of plows from a farmall 200 work?
    Gary wrote on Sunday, March 26, 2006 (PST):
  • Am trying ti find approx. price that a 1952 Farmall C is worth. Tractor is in excellent running condition but needs cosmetic work. Thanks
    Rowena Parsons wrote on Friday, March 17, 2006 (PST):
  • I am uncertain about the model. Can anyone tell me if the Farmall C came with an under belly mower? How much would the under belly mower be worth? How can someone judge the condition of an older tractor? How can you put a price a tractor of this calibur? Especially when it was still running in the late 70's. It has been in a shed pretty well shelter from the weather. Open for suggestions and/or ideas. We are considering selling it for reasonable price to someone wanting to restore it. It has been in our family for 45 to 50 years. We prefer not to separate the tractor from the mower.
    John Hein wrote on Wednesday, January 18, 2006 (PST):
  • I AM REDOING A FARMALL "C" WITH SERIAL # 12000. IT HAS A WATER PUMP AND THE THREE POINT HITCH IS IN FRONT OF THE STEERING WHEEL. CAN ANYONE TELL ME IF THIS IS A "SUPER" AND IF IT IS A McCORMICK OR A McDORMICK DEERING? ALSO I AM LOOKING FOR A GOOD SET OF FENDERS FOR IT AT A REASONABLE PRICE.
    Jennifer wrote on Saturday, December 24, 2005 (PST):
  • My husband has a Farmall Super C and C Tractor with a set of two way plows but he doesn't know if he has all of the parts to put them on the tractor so if any one could please help him with this I would be most thankful.
    Wes J. wrote on Tuesday, October 18, 2005 (PDT):
  • I'm looking for a wide front end for a 1948 Farmall C? Prefer within 200 or so miles from Joplin, MO. Please list price.
    Deanna wrote on Saturday, September 03, 2005 (PDT):
  • What memories I have of the C. My Grandfather owned 4 out of our 6 tractors. One of them being the C. When my 2 brothers and I were very small it did not run and what fun we had pretending on it. Then one winter Grandpa and Dad got it running again. Grandpa put wood blocks on the clutch and breaks so my brother's feet could reach them. At age 9, he learned how to plow with that C and its 2 bottom plow in the corn field behind our house. We continued to use that tractor well into our high school years (1980's). During winter school breaks it was used to pull the home made trailer to the woods to bring back the wood that had been cut and split for our winter heat. All 3 of us learned to drive on that tractor. When my Grandfather sold the farm, all the the tractors including our beloved C were sold. How I wish I still had that tractor to teach my nephew's how to drive. To this day my best friend and I argue which tractor is better--my C or her Dad's Oliver.
    Kim King wrote on Wednesday, July 20, 2005 (PDT):
  • I have a 1952 Farmall Super C tractor and would like to have a ball park fiqure on how much the tractor is worth. It is not restored. I was considering on selling it and didn't want to get ripped off. Thanks
    Eric Young wrote on Friday, July 15, 2005 (PDT):
  • Im am restoring 3 framall at is time a super c a framall H and a 300 utility they been in the family since they were new my grandfather bought them new and used them on his farm. i need a few parts to complete the job so ive been looking if you have any i could use them.
    Nicole wrote on Sunday, June 26, 2005 (PDT):
  • Hi, I'm trying to find a round about value for an 1950 C anyone have a knowledgable guess?
    Alex wrote on Friday, May 20, 2005 (PDT):
  • I had a C and traded for an H. Was this a stupid thing to do. The C seems to be more rare. Is the value about the same (I hope). The H is just bigger, you know how boys are. aaarrrraaaarrrraaaarrr
    Richard wrote on Wednesday, May 18, 2005 (PDT):
  • I have a 1949 C,which is needing a clutch,pressure plate etc.,can anyone direct me to a website I can purchase a manual which will give me the required steps for clutch replacement? Also,recommendations location for purchasing the required parts for this work?
    Jim Wolf wrote on Monday, May 09, 2005 (PDT):
  • I have my father's completely restored, mint condition Super C, Super H and H in the barn ready for sale. Any interest, please give a shout for details.
    Murphy wrote on Thursday, April 21, 2005 (PDT):
  • I've got a 1950 C I am missing the air cleaner assembly. Does anyone know where I might find one?
    Ron wrote on Thursday, April 21, 2005 (PDT):
  • I have a 1948 Model C. I know something is missing from the tractor but I don't know what the tractor looked like new. I would like to buy a complete set of pictures if anyone has them. Thanks Ron
    Sheridan wrote on Sunday, April 03, 2005 (PDT):
  • My 51 Farmall C needs a rad cap as the rubber is hard as a rock . Someone told me the original cap had the temperature guage in the cap . Can anyone tell if this is so ,and if so where I might get one , Thanks Sheridan
    Sheridan wrote on Tuesday, March 08, 2005 (PST):
  • Thanks , It is a real nice little tractor , new rear tires ,all tin with only 2 small dents and all the implements . Runs like a top
    FC DON wrote on Monday, March 07, 2005 (PST):
  • Sheridan, your Farmall C is a 1951. I have a 1950. Good tractor. F C Don
    Sheridan wrote on Saturday, March 05, 2005 (PST):
  • I just purchased a c model which I plan to restore . Does not need much other than paint . I am trying to establish the year it was built . S/N 79497 Can anyone help out . Thanks . Sheridan
    Jerry Manning wrote on Wednesday, February 16, 2005 (PST):
  • For Glen Wilson, pertaining to his "C" The C's before about mid 1953 are standard "C's" and have serial numbers less than 100000. Later "C's" are "Super C's", have a few more horses, water pumps, disk brakes. Try Glen Mlnarik at "Little Red Tractor Company". E-mail gjmlnar at megavision.com serial numbers; 1948 start at 501, 49 at 22624, 50 at 47010, and 51 at 71880. Look under seat support on right side.
    Glenn Wilson wrote on Wednesday, February 16, 2005 (PST):
  • I have a Farmall C-130 single hitch with wide front wheels. Where can I find info on this tractor. When made and a source for parts.
    Dick Diederich wrote on Friday, February 04, 2005 (PST):
  • I have as farmall c like the one in the picture. Iv'e had it for 18 years now and I keep it at my cottage where I use it for cutting wood and plowing snow in the winter. I put a cab on it about a year after I had it. It sure is nice and warm in the winter.
    Dick Diederich wrote on Friday, February 04, 2005 (PST):
  • I have as farmall c like the one in the picture. Iv'e had it for 18 years now and I keep it at my cottage where I use it for cutting wood and plowing snow in the winter. I put a cab on it about a year after I had it. It sure is nice and warm in the winter.
    David wrote on Tuesday, December 28, 2004 (PST):
  • My name is David Harvey,my dad just bought a 1958 power king tractor.he is needing some info or some pictures /parts. If anyone has some info please let us know . thanks David harvey
    woody wrote on Monday, December 20, 2004 (PST):
  • just bought 54 super c off this farmer that was 80 years old and has had it since 1964 with wide front end great shape sheet metal and mint fenders runs like new new bought it for 3500 first tractor i ever owned and am now looking to buy a wd 45 ac that is in really great shape sitting in a barn guy said i could have it for700
    Ellsworth Chase wrote on Monday, November 22, 2004 (PST):
  • I recently full restored a 1952 Super C to showroom condition -- spent ~$5500. I added a hydraulic 3 point hitch from Saginaw, as the tractor had a loader and the hydraulic ports to easily connect. The tractor was purchased new by my dad and I did the right job on it. The tractor results can be view on www.chaselinks.com.
    Lee wrote on Sunday, November 14, 2004 (PST):
  • What would a Freeman loader w/ manure bucket be worth. It fits a Farmall C and is in good shape. Both hyd.cyls. work.
    Nancy Leemhuis wrote on Sunday, November 07, 2004 (PST):
  • I have a white IH 1950 Model C. I am looking for a gas tank. Does anyone know of a market? Thanks.
    Barry von Thun wrote on Wednesday, September 22, 2004 (PDT):
  • I have a 1950 super c that i had carb. rebuilt I cannot get it quit black smoking . Any help please.
    Jess Perkins wrote on Wednesday, September 15, 2004 (PDT):
  • I just bought a Farmall-C. The serial # plate is missing. Need help figuring out the year.
    Glenn Sitler wrote on Wednesday, September 08, 2004 (PDT):
  • I have just purchased a white demonstrator model "C",with wide front end.IT is in unrestored very good condition with the overpainted red paint mostly peeled off, showing the beautiful white paint job underneath. I am wondering if this troctor should be restored or would it be of more value to leave as is.A good pressure wash job will probably remove nuch more of the red paint. I am interested in obtaining an owners manual for it.
    JAMES wrote on Monday, August 23, 2004 (PDT):
  • WHERE CAN ONE FIND 12.4X38 TIRES FOR F.C TRACTOR HAVE TWO (C;S) WILL TRADE ONE
    Hank Hackett wrote on Sunday, August 22, 2004 (PDT):
  • I have a similair tractor but with he wide steering wheels. I think it is a farmall (FC) super c. the serial number is 188913. It appears to be a 1953 or54 year of production. Is this correct.
    DCM wrote on Sunday, July 04, 2004 (PDT):
  • am looking for wide front-end for super C
    w. d. peewee mizell wrote on Wednesday, June 23, 2004 (PDT):
  • i have a 1949 farmall c ,barn kept every night,every thing orginal with all implments. bought by my father in law for 2500 dollars in Navasota,Texas.I am currently restoring it. not much to do to it. also have other J D tractors.
    al deMedicis wrote on Saturday, May 29, 2004 (PDT):
  • i have a "c" that has a leaking gas tank. anybody know where i can find a tank that dont leak i would appreciate the reply.
    CATES wrote on Monday, May 24, 2004 (PDT):
  • SUPER C FOR SALE...RT103729 at AOL.COM
    Cates wrote on Monday, May 24, 2004 (PDT):
  • I HAVE A SUPER C FOR SALE...BELIEVED TO BE 52 OR 53 MODEL..JUST USED IT LAST WEEKEND AND THE MOTOR IS CHERRY...ORIGIONAL EVERYTHING...EMAIL FOR DETAILS
    Art Rude wrote on Tuesday, April 27, 2004 (PDT):
  • I have a 1951 super C that is 75-80% restored and have lost interest, would like to sale.
    PATRICK MAHONEY wrote on Wednesday, April 07, 2004 (PDT):
  • Is there any interest in a Farmall C (Hi-Crop)? Would like to know value of this prize.
    DAVE wrote on Monday, April 05, 2004 (PDT):
  • I have a Super C for sale with bushog,disc,and two bottom plow [needs paint] $1800.00.
    gilles deschenes wrote on Monday, March 15, 2004 (PST):
  • i would like to know what is the difference between farmall c or super c thank you and the seria is 72068 what year
    Mike Lupo wrote on Friday, February 06, 2004 (PST):
  • I have a famall C and just bought a factoy front end loader for it. Can someone tell me how to hook up the hydraulics on the tractor. Sure could use some help on this. Thanks
    Jamison wrote on Sunday, February 01, 2004 (PST):
  • Im looking for an owners manual for a super C Im working on. Any help or resources, please email me.
    Rick Huebschman wrote on Sunday, January 25, 2004 (PST):
  • What is the horse power of a Super C?
    DENNIS wrote on Thursday, January 15, 2004 (PST):
  • WOULD LIKE TO BUY NICE C SO I CAN HAVE MY A-B-C
    Marv Smith wrote on Saturday, January 10, 2004 (PST):
  • I'm looking for a wide front end for a Super C, also a 5 or 6 foot disc in good condition. Any help is appreciated.
    dan kinney wrote on Friday, January 02, 2004 (PST):
  • wrote 1-2-03 have 52 super c wide front for sale or trade need something with 3 pt and bucket mint shape
    Kenneth Hope wrote on Tuesday, December 23, 2003 (PST):
  • I have a 1953 model Super C with fast hitch and am looking for any fast hitch implements for it
    benito cortina wrote on Monday, December 08, 2003 (PST):
  • Have 1950 Farmall c, Need oil capacities and wiring diagram
    tom greenhalge wrote on Tuesday, November 11, 2003 (PST):
  • ive got a 48 model c a real beauty. not as perfect as the one pictured above but it is put away for the winter now,.pictures are all I'll have till april of course there are always tractor supply stores, and attachments to look at Oh yeah today is vterans day! GOD bless all vets past & present and thank you for your service
    Rickey Bolden wrote on Monday, November 10, 2003 (PST):
  • Have A IH Model-FC tractor for sale. Thanks
    Earl Cox Sr. wrote on Saturday, October 25, 2003 (PDT):
  • I have a 1950 Farmall M and I need a diagram of the wiring for the lights. The guy I bought it off of converted it from a 6 to a 12 volt and I don't think it did it right If any one has a diagram of the wiring if I could get it or some info on it. Thanks Also I'm looking for a 3-point hitch for it.
    rodney wrote on Thursday, October 09, 2003 (PDT):
  • I have a Farmall Super c with a stuck engine for sale $800.00,A complete set of cultivators $150.00.A sickle bar midmount mower $200.00
    W Pfennig wrote on Saturday, September 20, 2003 (PDT):
  • jim... that's awesome. You have enough to have a square dance with them all. Have you ever seen them do that with Cs/SuperCs and even Hs. It's kinda wild to watch them.
    jim wrote on Monday, September 08, 2003 (PDT):
  • my dad and I have 3 super C farmalls,1 restored,5 C farmalls 2 restored and 1 B farmall restored.So we have some more work ahead of us,Dad's like a kid at christmas when tractor show time.
    melissa wrote on Monday, September 01, 2003 (PDT):
  • I NEED TO KNOW HOW I CAN GET THE HISTORY OF A FARMALL SUPER C 1952?, AND IF THERE WAS ANY MADE WHITE IN THAT YEAR? THANKS..
    Don Caywood wrote on Saturday, August 23, 2003 (PDT):
  • I have a 1948 Farmall C for sale, serial #17759. It is in good mechanical condition, runs well, and tires are good. It would make a marvelous restoration project. Asking $1000.00. I have the original owner's manual.
    Gary Pedersen wrote on Wednesday, August 20, 2003 (PDT):
  • I have a cyclinder head for a Farmall C tractor that has yet to be used since having a valve job.
    brian haas wrote on Saturday, July 19, 2003 (PDT):
  • dose any one know what the first years c's where made in?i got a 48 just over hauled and knew paint job.
    Paul Grondin wrote on Friday, June 27, 2003 (PDT):
  • Looking for a wide front end for a 1951 farmall super c owners manual,allso a 2 to 3 point conversion kit.
    jim sutterfield wrote on Wednesday, June 18, 2003 (PDT):
  • LOOKING FOR A BELT FOR SCICKLE MOWER FOR 1956 FARMALL 200 wlith a 2-POINT HITCH
    Walter Burnham wrote on Monday, May 26, 2003 (PDT):
  • looking for plate assembly, idler mounting, brace, idler support, bracket assembly, and the rear drive sheave hub for a C-1 rotary mower. It's a belly mower for a cub, a '48. The numbers are 474509R91,474525R1,474510R1, and474511R1. The brackets I have are offset and won't work.
    Wayne Walker wrote on Tuesday, May 20, 2003 (PDT):
  • Recently purchased a Farmall 200. I think this tractor replaced the Super C? I think they were made in '54, '55, and '56? The tractor is in excellent shape and has a three point hitch. Where can I find more info, specs, etc. on this tractor? Also, it appears some parts from the Super C are interchangeable? Can anyone help with this information? Thanks! Wayne
    dan kinney wrote on Friday, May 02, 2003 (PDT):
  • i have a 1952 super c for sale great shape 5-1-03
    Harry Culpepper wrote on Wednesday, April 30, 2003 (PDT):
  • I have a Farmall "C" that I purchased a few years back. I am not sure of the model year, but I would like to restore it. Problem is, I don't know much about it. Any help and/or suggestions would be greatly appreciated.
    Nancy Leemhuis wrote on Saturday, April 26, 2003 (PDT):
  • I recently brought my childhood Farmall C home after my Father passed away at 90 years of age. He purchased it in 1950 as a "white" demo, and it was painted red before we could bring it home. I am looking for replacement or oem parts. Does anyone have any info on places to look. We are in need of a gas tank. Thank you so much.
    barry von thun wrote on Tuesday, March 25, 2003 (PST):
  • have 1 10 x 36 tire tube & wheel for sale
    Marty Stange wrote on Tuesday, March 25, 2003 (PST):
  • I am trying to remove the oil pump from my "C" but do not have a diagram to know how to remove it. Is their anyone with a suggestion.
    Travis Moore wrote on Friday, March 07, 2003 (PST):
  • I am getting ready to restore my grandpa's first tractor, a 1948 c, but am havin a bit of trouble finding information on the net. I am also wondering if the conversion to the two point is costly. Any information would be helpful. Thanx guys.
    Philip Koubsky wrote on Saturday, February 15, 2003 (PST):
  • i own a 1951 super C farmall that i bought off my neighbod after he had his 3rd stroke, i trackted the history and found out that origionaly when boughten it was painted Demonstrator white i have a 2 row cultivator for it and would like information on the demonstrater models and some help tracking a planter, plow and a set or rear fenders for the tractor.
    Mickey Cook wrote on Friday, February 14, 2003 (PST):
  • I need the noise cone and hood for my Super C in order to finish my restoration. Please contact me if you can help.
    Doug wrote on Monday, January 20, 2003 (PST):
  • Looking for cultivators for a Farmall C. Who's got the best junk yard around for these things??
    justin kubesh wrote on Monday, January 20, 2003 (PST):
  • My grandpa has a farmall c. we use it to mow lawn, it has a narrow front.
    Tom Sager wrote on Monday, January 13, 2003 (PST):
  • Looking for a hand crank for a 51 Super C What other models of hand crank will work?
    Jay wrote on Friday, December 27, 2002 (PST):
  • My grandfather owned a Farmall Super C...both "Grandpa" and the tractor are long gone now. But I am looking for a restored Super C to purchase...any information on any for sale would be greatly appreciated.
    Allen Jones wrote on Monday, December 23, 2002 (PST):
  • I have a 1949 Super C tractor with a homemade three-point hitch. The tractor is not operating, but its body is in good shape. Its serial number is 351132-R1. Can anyone tell me the approximate value of this tractor? Thank you.
    Dug_E wrote on Tuesday, December 17, 2002 (PST):
  • Please do not bombard me with E-mails telling me that my above tractor is a 47 not a 50. I would like to make a correction and an update to the information above. The serial number of this tractor is FC 51563 not 1815. The 1815 number is the second number stamped on to the serial number plate, but due to years of wear and tear I am no longer able to read what this number represents. If you know please tell me. Thank-You.
    Dug_E wrote on Monday, December 16, 2002 (PST):
  • I am in the process of restoring my Grandfather's Farmall Model C #1815. He bought the tractor in the mid 50's painted red, and equippped with touch controll hydraulics and the adjustable front axle. Upon the initial washing of the tractor I found the single coat of red paint washed off as readily as the dirt, to reveal a dirty white paint job underneath. I have since learned that this was a dealership 50th anniversary demonstrator model from early 1950 and was re-painted red at the dealership before being sold. I am searching for some knowlegable people to help me learn some of the history and details of the Model C. Over the years some things have been added and changed to the tractor, so I would appreciate any information on options avaliable at this time. The tractor is presently equipped with a rolling draw bar and backwards folding seat assembly. Both of which I believe have oame off a newer model. I also need to know if there is supposed to be a spark arrestor, muffler, and what model carburator was it equipped with? I think the carburator may have been changed as well. I am also looking for a complete decal package for the tractor including; hood, model, gastank, air cleaner, breather cap, pto guard, fan blade, fender, lights, and oil filter decals in the demostrator sceme. I also understand a few parts such as the wheels, air cleaner, and possialbly the steering wheel, lights, and perhaps some other parts were still painted red, is this true? If anyone can help me with any facts, stories, information, or history about this great tractor, please e-mail me, I would greatly appreciate it. Thanks. P.S Does anyone know for certain exactly what the differences between the c and the super c is in 1950?
    W Pfennig wrote on Thursday, December 05, 2002 (PST):
  • Other than the Serial # plate, the only real visible difference is the brakes. The brakes and their covers are different. The radiator and pistons are slightly larger on a Super are bigger, but this cannot be seen.
    jim wrote on Thursday, December 05, 2002 (PST):
  • What's a good price for a 51 Super C or C in original condition with disk, harrow and plow? Also, what is a good way to visually tell the difference between a C and a Super C? Right now I'm just looking at a picture. Jim
    Joel Bartling wrote on Monday, December 02, 2002 (PST):
  • I am 13 and own a farmall C that was passed down from my great grandpa to my grandpa to my dad and then to me. We use to have a junky mounted sickle mower that came with the tractor. We got rid of that about 8 years ago. Now what we realy want in a mounted john deere #37 mower with a 7' bar. If you now of any forsale in South Dakota or Nebraska please email me
    tim wrote on Saturday, November 30, 2002 (PST):
  • I AM BUYING A SUPER C AND AM LOOKING FOR A SET OF TIRE CNAINS FOR IT IF ANYONE COULD HELP THAT WOULD BE GREAT THANKS
    tim wrote on Saturday, November 30, 2002 (PST):
  • i am buying a super c and am looking for a set of tire chains for it could any one help
    judy McGlaughlin wrote on Saturday, November 30, 2002 (PST):
  • my brother has a farmall super C series and is looking for a 2 point hitch and also a picture of a 2 point hitch so he can take it to the local farm trade shows and compare. If someone has a picture they can email me of one that would be great. Also if anyone knows where we can get one please have them email me thanks!
    Chris wrote on Monday, November 25, 2002 (PST):
  • I have a 1951 Super C and am real impressed with that tractor. We bought it brand new in 51 and had no major problems with it. It is probably one of the best tractors ever made. I know it could take a JD 60 anyday.
    Joel Bartling wrote on Thursday, November 07, 2002 (PST):
  • We could also use a JD #5 7' mower that will fit on a C.
    matt m wrote on Monday, November 04, 2002 (PST):
  • There's a C to be sold at auction in a couple of weeks it has a wide front end, any ideas on what I should pay.
    Joel Bartling wrote on Sunday, October 27, 2002 (PST):
  • I am looking for a mounted seven foot sickle mower for a farmall C. If you have any information Please email us. Please include price and condition. Thank you.
    Wally wrote on Wednesday, October 23, 2002 (PDT):
  • The narrow front does tend to dig in a bit in wet conditions. Mine has 5x15 tires and front and that doesn't give a whole lot of tire on the ground. Going straight isn't too bad, unless it's real wet. When you turn it might really want to dig in. As far as changing the front end... that might help, but they're difficult to find. With a wide front you might be able to put a wider front tire on which would help a bit. It would also make it much safer on slopes and ditches. Tri-cycles tend to be tippy. I'm not sure exactly what you are refering to in cutters but mine has no problem with the original IH 7' sickle mower. I've often wondered if I could put some larger front wheels on front. Yours probably has three tabs welded on the rims which holds the rim to the front wheel. H's and M's as well as 141 combines and other implements had heavier rims and tires which didn't have these three tabs welded like this. It might be possible to adapt these to a 'C'. This would allow a larger tire to be used and would provide better flotation. Hope this helps.
    conrad wrote on Tuesday, October 15, 2002 (PDT):
  • I am looking at buying a 1952 super c farmall. It is in very good shape, it is a one-owner tractor. I am going to use it mostly for bushhoging. It has the tricycle front end. Will this type of front end dig into my pastures if they are wet? Can you change the front end out with a wide type? I would like to know if a super c can take a sickle type side blade for cutting pasture . Thank you Conrad
    Glenn T. Jordan wrote on Thursday, October 03, 2002 (PDT):
  • I have an old Internatioal Harvester that I'm trying to find more info on and ultimately restore. The serial plate says Model FC Serial #22189, 1815 rpm max idle speed. Can anyone help me find the year this tractor was made? Thanks.
    Jacob W. wrote on Saturday, September 14, 2002 (PDT):
  • Find a C with a wide front and switch em'
    DON HILL wrote on Thursday, September 12, 2002 (PDT):
  • Where can I get a conversion kit from narrow front to wide front
    Dick Bibbins wrote on Thursday, September 05, 2002 (PDT):
  • I have a set of front cultivators to fit a Farmall C thru 200 if anyone is interested. I am in upstate New York.
    Ron Nuckles wrote on Wednesday, September 04, 2002 (PDT):
  • I'm atempting to repair a farmall c built somewhere between 1947 and 1951. the ser.# is 61993, might make it a 1950. This tractor belongs to my pastor, and i would like very much to be able to fix it for him. I'm looking for a Rockford or atwood clutch, pressure plate and throughout bearing. can any one direct me to where i might be able to find these parts? thanks much, Ron
    Mike Kennis wrote on Wednesday, August 28, 2002 (PDT):
  • I broke my leg in 3 places when I stepped off the rear axle of my super C, it damn near ripped my leg off. My wife is making me sell the tractor in October, if you want the wheel your welcomed to it.
    john cummings wrote on Wednesday, July 31, 2002 (PDT):
  • looking for a rear wheel for my farmall c.
    Warren Darcey wrote on Thursday, July 25, 2002 (PDT):
  • I own a 1953 super C. This is one fine tractor, though it could use a paint job.I would also like to know where i might fine decals, where as all the idenifiction names are wore-out with time. I also may be interested in selling this tractor due to failing health. She is in Very good condition thru out. I live in Northport Alabama (next door to Tuscaloosa. ROLL TIDE!!!
    Andrew Menkart wrote on Monday, June 24, 2002 (PDT):
  • I don't know if this is the correct place to post this question or not... but I am trying to detirmine what tractor used the IHC C-60 engine. I am trying to get an engine service manual and I understand that there is a tractor manual that contains engine service information. Can anyone tell me or direct me to the manual...? Maybe this site sells the manual, but I don't know what tractor model it is. The IHC model C-60 engine is 4 cyinder, 2-5/8" x 2-3/4", 60 cid Thanks... Regards, Andrew Menkart
    Ervi wrote on Saturday, June 15, 2002 (PDT):
  • I would like to change my super c over to a 3 point hitch. can someone tell me where I can get the parts to do this.
    GRANT JONES wrote on Thursday, June 06, 2002 (PDT):
  • THIS IS TO ERIC YOUR TRACTOR IS A 1953 MODEL
    GRANT JONES wrote on Wednesday, June 05, 2002 (PDT):
  • I AM 13 AND LOVE OLD TRACTORS WELL I HAVE ALOT OF OLD TRACTORS. THIS IS WHAT I KNOW ABOUT WHITE TRACTORS IN 1950 IH PRODUCED CUBS,SUPER As, AND Cs PAINTED WHITEAS SALES DEMONSTRATIONS FOR THE "MID CENTURY" SALES PROMOTION.MANY OF THEESETRACTORS WERE LATER REPAINTED RED AFTER THE PROMOTION WAS OVER AND THEY WERE SOLD TO FARMERS. THE DECALS OF THE DAY HAD CLEAR BACKGROUNDS ANDTHE APPLICATIONOF SERVICE DECALS WITHRED BACKGROUNDS WAS VERY NOTICEABLE. THE TRACTOR HAS A FEW RED PARTS ON IT. WHAT WAS PAINTED RED AND WHAT WAS PAINTED WHITE ON THESE TRACTORS HAS ATTRACTED SOME DEBATE AND UNFORTUNATELY IH MADE NO RECORDS IF U NEED INFO ON IH TRACTORS I AM THE MAN IF I DONT KNOW WHAT YOU NEED I WILL "TRY" TO HELP YOU FIND IT I CANT GUARANTEE YOU THAT I CAN FIND IT BUT I WILL HELP
    Bill wrote on Sunday, June 02, 2002 (PDT):
  • I now own a super c.
    Jay Downing wrote on Sunday, May 12, 2002 (PDT):
  • Im looking for a wide front for my Super C, and also a front grill in decent shape. I Recently bought the C. Seems to be a pretty snappy tractor for its size.
    Sam wrote on Saturday, April 27, 2002 (PDT):
  • Love that tractor, I am looking fer a Super "C" to restore in the calif. area, if anyone knows of one reasonable please e-mail me at Cvbmxr at netscape.net
    Peter Holden wrote on Saturday, April 20, 2002 (PDT):
  • I have purchased a 1948 Farmall c with a snow plow. I have also just purchased a 2 bottom plow that I am not sure how it is to attatch. The plow has two arms that come to points. There is a steel stop on the bottom side of the arms and a 5 to 6 inch cut out on the top side of the arms just behind the pointed end. I hope this makes sence to someone. The hydraulics have the left and right quick hitch arms and all the appropriate hardware. Looking for some advice.
    Matt wrote on Tuesday, April 16, 2002 (PDT):
  • Was there something special about the Farmall C's seat that made it different from the A & B.
    Owen LaBarge wrote on Sunday, March 31, 2002 (PST):
  • I am looking for a pair of rims for my C. I would like them to be original, not aftermarket. Also if anyone has a grill assembly or attachments please e-mail me. Thanks.
    Nancy wrote on Friday, March 29, 2002 (PST):
  • Looking for specs on 1948 Farmall C, specifically the center of gravity. Would anyone have this information or know where to direct me?
    Bruce wrote on Thursday, March 28, 2002 (PST):
  • Looking for a fuel tank for a super C, have a fuel tank for a C that i don't need, anyone interested?
    farmerjim wrote on Wednesday, March 27, 2002 (PST):
  • today i purchased a 1951 farmall c this is my first restoration project and also my first tractor i need all the help i can get what do you think
    The Super M wrote on Wednesday, February 27, 2002 (PST):
  • I'd argue that!
    Courtney wrote on Thursday, February 21, 2002 (PST):
  • My papa has a Farmall and a John Deere. My twin sister and I love to drive the tractors in the pastures. I like Farmall's but John Deeres are the best!!!
    D Dykes wrote on Wednesday, February 20, 2002 (PST):
  • Matt, did it have the single tire on the front or dual setup? I would have sent you $100.00 bucks if I had known sooner!! By the way...did you get the name of that junk dealer?
    Matt M wrote on Wednesday, February 20, 2002 (PST):
  • How much would a "C" be worth w/ a narrow front end? Reason being at this farm auction in July a "C" came up for sale with a narrow front end. The electric starter wasn't working and they attemped to crank start it but yet it failed to start. I was gonna offer 100.00 but decided not to. Nobody bidded on it and some junk dealer got it for 50.00 should I have given 100.00?
    Lyle McCain wrote on Wednesday, February 20, 2002 (PST):
  • good for you hoss.
    kyle king wrote on Sunday, February 10, 2002 (PST):
  • I have a farmall super c,I have used it alot around the farm
    Don wrote on Thursday, January 31, 2002 (PST):
  • I have inherited a family owned, wide frontend "C" Farmall. It is in the shop now having a three point hitch installed. I also need a set of fenders and a owners manual. It came with the two row culitvators and extra set of tires and rims. I am going to restore it back to the original look. I love playing with the tractor and all of my friends do to. I'm not sure of the year since I got it right after Christmas, 2001.
    The Super M wrote on Tuesday, January 29, 2002 (PST):
  • TRY a farm tractor parts store, where are you located?
    Daren Traugh wrote on Monday, January 28, 2002 (PST):
  • Hi,my name is daren and i have a farmall 200 and i need brake parts because the brake's are hanging up does anyone know where i can find part's.
    George Nelson wrote on Friday, January 18, 2002 (PST):
  • Are wide front C's very rare? I owned a C for 6 years but traded her in on a H, which was later traded on a Super MTA( with an extra 1,000.00 to boot ). I'll give these Farmall's credit, there great ol' machines. I refuse to drive anything other.
    Fred Reeker wrote on Monday, November 12, 2001 (PST):
  • I am restoring a 1950 C Farmall I would like to find a grill with no dents at a reasonable price.
    The Super "M" wrote on Monday, November 12, 2001 (PST):
  • To Brettjuckette; Painting your own tractor can be relatively inexpensive. If you know folks in the auto-body trade it can be just the cost of the paint and a little cash to the painter. I took my Farmall Super M into the local Vo-Tech school and all it cost me was the paint and a small tip to the students.(they did a good job on er') The paint is easy to come by, just get Farmall red or International Harvester red. Good Luck & Have Fun.
    brettjuckette wrote on Friday, November 09, 2001 (PST):
  • I am 15 and bought a 1952 farmall super C it took me and my dad about a hour to get it runing, after that we did some things that i though we did not need to do, re-gap the valves chang the belts and so on, well now it starts like a charm and i thank him for that. the reason i am righting is when i bought the tractor it was missing the air filter cover (on the bottom)and was woundering whear to find one. i am woundering how much it would cost to get the tractor re-painted any help is thanks in Advances. thanks again.
    Matthew from Pennsylvania wrote on Thursday, November 08, 2001 (PST):
  • Thank you very much Mr.Pfennig, I will consider purchasing this tractor at the price they are asking. Your advice helped.
    Wally Pfennig wrote on Wednesday, November 07, 2001 (PST):
  • If it starts, runs, and rolls well it's worth it. If the tin is straight, everything works well, and it's not too junkie, $900 is a deal.
    Matthew from Pennsylvania wrote on Wednesday, November 07, 2001 (PST):
  • There's a Farmall "C" in the local paper advertised for $900.00, condition is said to be old. We need a tractor for light farm work, and was wondering if 900.00 is a fair price for this tractor ( considering "old" condition )?
    The Super "M" wrote on Wednesday, November 07, 2001 (PST):
  • I'd be cautious when using a disc for a lawn/yard, those things do tear up the sod pretty good, if your looking for a yard disc I'd get a small, light one or even a thather. Now for the mower, you can't go wrong with a Bush Hog rotary mower ( powered by P.T.O ). The year is unknown at this time. Hope this infomation helps you.
    Eric wrote on Monday, November 05, 2001 (PST):
  • I just bought a Super C(I think its a super C because it has a water pump?), Serial # FC 160926. I want to use it to mow and disc my lawn. It came with a 3 pt hitch and a rear snow blade. Any ideas on what year it is? Also, what would be the best mower & disc to get?
    Dave Brubaker wrote on Monday, October 22, 2001 (PDT):
  • Het fellas 'bout that "C" the man called me and said that he's also gonna include a sickle bar mower, plow, & mini manure spreader. This tractor's in great, well cared for shape. Don't miss it, this thing will go cheap. Theirs loads more of information so call me at 717-865-0510 ask for Dave or Henry.
    Dave Brubaker wrote on Friday, October 19, 2001 (PDT):
  • I'm selling a Super C at my auction on the 3rd of November. Prime,showroom shape. Call 717-865-2881
    Super "M" wrote on Tuesday, October 16, 2001 (PDT):
  • In response to EG I think it's a Mason Jar, but don't hold me to it. 80% sure...
    EG wrote on Sunday, October 14, 2001 (PDT):
  • What are the specifications for the jar that fit on the air cleaner for the Farmall C? I want one like the original. Was it a Ball or Mason jar?
    bill levad wrote on Thursday, September 27, 2001 (PDT):
  • Hi Nice tractor. I have one just like it I also have some parts for the old farmall super and c's email me if you are needing some.
    Bob Klein wrote on Tuesday, September 25, 2001 (PDT):
  • I'm looking for a belly grader for my 1956 C class
    Carolyn Terry wrote on Tuesday, September 18, 2001 (PDT):
  • My son just finished fixing up my 1962, 540 ,I.H. Farmall.. what we need to know is where do we add the Hydraulic fluid? The owners manual says, but we can't find the level plugs.. If anyone know please e-mail me... Thanks so much.
    Harold Bryant wrote on Monday, September 10, 2001 (PDT):
  • I think you folks can still find some old original stickers and decals at Amburgy Farm Machinery in Mt. Sterling Kentucky. But be prepared to be careful with them. The old celophane decals had to be soaked in water and then slid off the paper backing and put in exact position or they will tear very easily. If this don't get them, go to Steven's Equipment, Petersburg Ill. Good Luck
    J.W. Kupsick wrote on Thursday, August 30, 2001 (PDT):
  • When I was 12 I learned how to rake hay with one like this,but it was a super C pulled a doubble rake hookup L bar with 2 rakes,you could make 2 windrows or 1 doubble. I enjoyed it because you could see what was going on around you, we also used a cultivator for the maize and the corn.. 4 row lots of time on that tractor as a young boy,enjoyed it... very nice tractor J.W. Kupsick Warner,OK.
    Owen LaBarge wrote on Friday, August 17, 2001 (PDT):
  • I am 13 and are interested in restoring a 1949 Farmall C to orignal condition. I am looking for a gas tank with no dings or dents for a fair price and also a gril assembly. I am also looking for attachments that could have been bought or came with the tractor. Thanks.
    Wayne Jones wrote on Monday, July 30, 2001 (PDT):
  • I have what I think is a 1951 C ? I would like to know what it is worth now. It looks just like the one in the picture ( without the excellent paint job!)
    Carl Johnson wrote on Monday, July 30, 2001 (PDT):
  • I own a super c.It runs good needn painted. My Dad bought the first c that came out in Butler Co. Ky.(1948) I was 12 yrs old.I loved that tractor it replaced 3 mule I was driving. Yes it had hydraulics.
    Wally Pfennig wrote on Thursday, July 26, 2001 (PDT):
  • ED HARTMAN; The shipping weight of your Super C is 2900 lbs (C is 2780 lbs without fuel and water) according to the IH Tractor Data book by Guy Fay. For 3 pt conversions... try www.farmstar.com, click on Rear Hitches, Click on 3 Point Conversions, Farmalls are near the top of the page. There are two diagrams links. It appears that it bolts to the axle housings and operates from the lift arms (neat design in my opinion). paul jr; Your Farmall C was made in late 1948. For serial# lookups... www.ytmag.com/cgi-bin/snlookup.cgi
    paul jr. wrote on Wednesday, July 25, 2001 (PDT):
  • I have a farmall c with serial numbers 21018.What year is it? THANK YOU
    ED HARTMAN wrote on Tuesday, July 17, 2001 (PDT):
  • does anyone know the appr. weight of a "53" super C without any added weight.....also could anyone describe the 3 point hitch conversion (how it works,where it bolts up?)..and what is a fast hitch?
    patrick wrote on Friday, July 06, 2001 (PDT):
  • i like you
    Ron Gates wrote on Monday, July 02, 2001 (PDT):
  • Sirs; Recently got a 1948 C Model and have cleaned up and running pretty good. I want to enter it in a local tractor pull (stock) on the 22nd July. I want to have the rear tires filled with the sodium mix for weight.What gear is better to pull in; seems like 1st is to slow to pull a sled. Also please let me know the place to get a six volt starter motor for this tractor; kind of hard hand cranking all the time especially after the block has warmed up. Even though it's not the same web page to mention it; I also have a 1948 Allis Chalmers which takes the same the same starter motor (less bendix and mount) that I will be entering.
    FC Andy wrote on Friday, June 29, 2001 (PDT):
  • I just got a 1950 farmall C the other day, I think it was a demonstrator. As I work on it I keep finding more and more white paint under the old faded red. I am 14 and just started the thing for the first time today after 2 1/2 days work.I bought it for $600 and it turned dragging it home. nice pic of C, I hope mine will look that good someday !
    Richard Freadling wrote on Wednesday, June 20, 2001 (PDT):
  • I have a super c and am looking for plans for a 3 point hitch for it. If anyone has a measured drawing or sketch I would appreciate it. Thanks
    Bill Lemons wrote on Monday, June 18, 2001 (PDT):
  • Have recently been able to purchase my wife's uncle's 1950 Farmall C. with disc plow, 2 bottom plow, bush hog, cultivators and a 2 row planter. Any information on how the planter works and attaches to tractor would be greatly appreciated without having to buy a 110.00 manual.
    CRAIG YAMNITZ wrote on Thursday, June 14, 2001 (PDT):
  • I HAVE A 49 MODEL C THAT I HAVE RESTORED. PUT THE SUPER C SLEEVES IN THE ENGINE AND IT RUNS GOOD. I LIKE TO USE IT AS MY RAKEING TRACTOR, BUT I JUST BROKE THE FT END. WOULD LIKE TO FIND A WIDE FT IF ANYONE MIGHT BE INTERRESTED IN SELLING ONE FOR A FAIR PRICE, WOULD EVEN CONSIDER PUTTING A NARROW BACK UNDER IT. IF ANY ONE CAN HELP JUST LET ME KNOW. THANKS CRAIG
    Zach Craig wrote on Tuesday, May 22, 2001 (PDT):
  • I have a Farmall Super H and a Farmall C which I plan on restoring both plus we have an International 1086.
    Mike Trimmier wrote on Monday, May 14, 2001 (PDT):
  • hey folks, My friend and I just acquired a 52 model FC farmall. It has the narrow front end and engine driven hydraulics but in the front like for a loader or some other device. question is, is this a c model or what. the engine is locked so we are working on it but would like to know what it is exactly. draw hitch on rear with no hydro. Just thought I'd ask and see. looks to have a timing chain driven pump with the hoses going to a unit just ahead of the battery. any information or opinions would be appreciated. MT
    Dave B wrote on Sunday, May 13, 2001 (PDT):
  • I have just restored a Super C which my grandfather bought new. I have found the original 2 row mounted planter which is a little rusty but totally intact. It has all chains, as well as fertilizer boxes. The "seed" hoppers were originally blue with white pinstriping and a decal which is not legible...McCormick is barely readable. Can anyone tell me more about this planter....and if it is worth restoring....and if decals are still available?
    Toby wrote on Sunday, May 06, 2001 (PDT):
  • i have recently purchased a farmall super C (FC 183070, i believe it is a 1953 year model. also with this i got another c for a parts tractor and the serial number plate is missing. my question is how do i find out what year or model it is?
    ted lonien wrote on Tuesday, May 01, 2001 (PDT):
  • i have a 1948 super C,my hydraulics ouit, any clue what to look for? thanks
    Ken Roffel wrote on Sunday, April 22, 2001 (PDT):
  • I am restoring a 1954 Farmall Super C. I am having some good fortune in locating new parts however, I do need to find where I can get the base that holds all of the guages. It also holds the control tower for the steering wheel and the lite bar fits on it as well. Any leads or suggestions would be appreciated. Regards, Ken
    Luke Petre wrote on Wednesday, April 11, 2001 (PDT):
  • I have been looking tractor for a while now and I found a 1950 Farmall C with a new overhaul, 2 botton plow, harrow, trailer, and weights for $2,000. I think this is a good price. Is it. The only thing I don't like about it is it does not have a wide front end. I looked around and I found someone who will put one on, but I am not sure about the plow, which is in the middle of the tractor. Will the wide front end affect the plow?
    T. ROSE wrote on Saturday, April 07, 2001 (PDT):
  • I'am getting ready to by a Super C and am trying to find out where to buy a new after market 3 point hitch does any one know where to find one thank you
    Kelly Fowler wrote on Thursday, April 05, 2001 (PDT):
  • I have recently purchased a c farmall and as it turns out it was one of the dealer demonstraters "origionaly painted white" if any one has any info on these tractors please e-mail me Thanks...
    Blake Bradley wrote on Tuesday, March 27, 2001 (PST):
  • My greatgranddad has a tractor just like this one and we are wondering the value of it. It has most of the original parts to it.
    Marie C. Gibson wrote on Monday, March 26, 2001 (PST):
  • I have a Super C Farmall Tractor in Western Pennsylvania, my late husband purchased, second hand, on March 18, 1972 from W. L. Dunn in Monroeville, Pa. I am interested in bringing it to Florida West Coast. Does anyone have an idea of what it might cost?? What would be the cheapest mode of transportation? What might it be worth today?? Thank You
    Francene wrote on Sunday, March 18, 2001 (PST):
  • My Farmall has 200 after the name. what manual would I need to buy for its use and implements available to that model? I have the cultivators,plow,two row planters and what looks to be a metallink conveyor belt.I need to be able to connect my augers and bush hog from my 8N. Any information regarding the workings of this Farmall 200 would be greatly appreciated.
    Luke Lund wrote on Friday, March 16, 2001 (PST):
  • I would like instructions for setting the carburetor on my Farmall C And advice on where to find that procedure would be welcome. Thanks, Luke
    S F Richmond wrote on Friday, December 08, 2000 (PST):
  • Sirs i have a 1953 farmall super c that has 2 way plows at have lost the controls from the lift system down to the front of the plows of the plows would appreciate any info on the rods to the plows
    Rich wrote on Saturday, November 25, 2000 (PST):
  • Does anyone have a diagram, drawing,or picture of a 2 bottom plow on a C. I,m not quite sure how it goes on. Any help would be great.
    Larry Davison wrote on Saturday, November 25, 2000 (PST):
  • I am interested in purcashing a Farmall C tractor. I prefer one that is in working order. Any leads would be appreciated.
    Bill Varney wrote on Friday, November 24, 2000 (PST):
  • I am just getting interested in vintage tractors. I plan to use it when I retire a few years from now, on about 5 acres of land. I am considering a small Farmall C or Supper C. However, before I buy one, I would like to do some research. Any suggestions on what books I should read?
    mark jarrels wrote on Friday, November 10, 2000 (PST):
  • i am 46 years old... learned to drive a tractor on a farmall c at about 12... also learned quickly how to override the governor... finily retired from the navy and retured home and restored the old farmall c. love the old tractor but to this day can't figure out why may dad every bought it... 8n fords were the were the best tractors in 1950 with the 3 point hitch and hydralics. my old farmall c did nothing but pull wagons, spreaders and and a old horse drawn mower convered to two point but i loved it. it does have the touch control which was used for the mower. would love to put a belly mower on it so time and use it for our 1.5 acre lawn.
    Bryan wrote on Monday, October 16, 2000 (PDT):
  • Looking for a loader for my C. 1948 serial #4000. any help with price or comments please
    Jerry Button wrote on Tuesday, October 10, 2000 (PDT):
  • My father purchased the Farmall C in Campbellsville, Kentucky in 1949. I was 6 years old. When it was delivered, I thought it was great. Two weeks later, while mowing pastures, dad drove the front end into a sink hole and broke the tractor in half just behind the radiator. Needless to say it was a sad day for the family. Later it was repaired and brought back home. We later moved to the city and the tractor was given to my uncle. It was used many years there after on my uncle's farm. He died a few years back and the farm was auctioned. God only knows who has it know. It was a fantastic machine that really looked great. All my other relatives had Deeres with the hand clutches. Those were the good years.
    pauline bendure wrote on Saturday, October 07, 2000 (PDT):
  • looking for parts for 1952 farmall-c, need carb, starter new or rebuilt
    JOHN PAUL JOHNSON wrote on Monday, October 02, 2000 (PDT):
  • I'M LOOKING FOR A CARBURETOR FOR A MODEL C OR A REBUILT KIT THE CARBURETOR IS A CARTER AND I HAVE NO OTHER INFORMATION
    Jay Bradford wrote on Wednesday, September 27, 2000 (PDT):
  • Well it has taken me almost one year to fully restore my Dad's first tractor... A Farmall Super C!! It was my first tractor restoration project. I don't know if i will do another one. It has taken a lot of money and a lot of time, but it was worth it! It allowed my Dad and I to spend quality time together and it is something that I will never forget. The finished project is incredible!! Now I'm ready for the parades!!!
    Rusty Betts wrote on Sunday, September 10, 2000 (PDT):
  • I HAVE A 1949 "C" THAT HAS NO HITCH AT ALL, OTHER THAN THE FACTORY DRAWBAR. I AM ALSO LOOKING (AS MANY OTHERS ARE) FOR A USED 2-POINT (ORIGINAL IS OK) OR 3-POINT OR ANY INFORMATION ON THIS TYPE OF HITCH. ANY INFO IS GREATLY APPRECIATED.
    g.p. simmons wrote on Sunday, August 13, 2000 (PDT):
  • To Keith Calhoun, I have a 1951 C, and I know they use the same grill and hood as an A. My uncle has an old A with a good hood, and I also need a hood, but he will not part with it, so I know how you feel!
    John M. wrote on Wednesday, August 02, 2000 (PDT):
  • I have several manuals for "C" and Super"C" tractors. Also have manuals for equipment--- plow,cultivator,planter,harrow, etc. If interested send me an email.
    Keith Calhoun wrote on Monday, July 31, 2000 (PDT):
  • I am restoring a 1947 farmall A. Does anyone know if a hood from a farmall C will fit a farmall A. I know someone in Tenn. who has a good hood from a C. But I'am not 100% sure it will fit. Any help is appreciated. Thanks, Keith
    John Streett wrote on Sunday, July 30, 2000 (PDT):
  • I'm looking for a 6' belly mower, a front mount snow plow, and rear fenders for my Super C. Appreciate any leads.
    Charles Kern wrote on Thursday, July 27, 2000 (PDT):
  • Just bought a Farmall C, in fairly good shape, how do I tell year from serial number? 58940. Hydraulics work, lighting still works, is still 6 volt. Even has cigerette lighter yet.
    Josh Newton wrote on Thursday, July 06, 2000 (PDT):
  • I am currently 14 years old and on our farm we have a 1951 Super C that my great-granfather bought brand new. Today it is still in tip top shape and still has the original cultivator with it. The two bottom plow sits out in a fenceline somewhere. The reason why it sits there is my great-grand father almost killed himself on it that day. It is still used on a regular basis around the farm although it has become pretty obselete with all of the newer tractors around.
    Nichole wrote on Monday, June 26, 2000 (PDT):
  • i am looking for ANY information on a white 1950 demonstration Farmall model c. ANY information will be helpful especially dates.
    Ray Peterson wrote on Sunday, June 11, 2000 (PDT):
  • For Mark, Contact Worksaver.com - they have a pretty wide assortment of after market IHC products, including 3pt hitches and 2pt to 3pt conversions. I have a 2/3 conversion on my Farmall 200 (successor to the super c) that works pretty well.
    Sherman Richmond wrote on Monday, June 05, 2000 (PDT):
  • Sirs i have an 53 Farmall Super C Bought new plows and cult excelllent runing condition garage kept new back tires needs paint whatare the going prices. Thanks s F Richmond
    MARK wrote on Friday, June 02, 2000 (PDT):
  • ijust got a super c is there a wide front end avalable,also is any conversion to a standard 3 point hitch thanks.ne ohio
    R.J. SILVER wrote on Friday, June 02, 2000 (PDT):
  • i have 2 super c a wfe and nfe 1953. a 1949 h nfe i am restoring them all. INFO A FARMALL C HAS DRUM BRAKES A SUPER C HAS DISC BRAKES all your supers have disc brakes
    carl wrote on Sunday, May 28, 2000 (PDT):
  • Ijust purchased a super C with a single front wheel. All the others i've seen use a wide front.Is the single wheel a common thing outside FL? It has 2 planters on the left side and a homemade cradle for 2 drums on the right.Also will this engine exchange with one in a 140?
    Kurt wrote on Wednesday, May 24, 2000 (PDT):
  • I'm familiar with the 8N's, however, how does the Farmall C use a bush hog? What is a drawbar. Is that where the implement is attached? Do the hydraulics operate underneath? The hydraulics don't come into play in the back of tractor do they?
    Wally Pfennig wrote on Monday, May 22, 2000 (PDT):
  • I also have been looking for fenders for my 'C'. I have had no luck. I'm sure that they would be pricey if anyone would be willing to sell them. Regarding 'C' hydraulics... it is my understanding that they came standard on the 'C' and it's variants. If the tractor has two levers and the implement lift arms on the sides of the hood, it has hydraulics. There is a relatively simple modification which can be made to make the machine capable of operating an external hydraulic cylinder. The hydraulic pump on these tractors has two plugs which can be fitted with hoses and piped to a valve which can then be fitted with traditional a hydraulic coupling. My only recomendation is to be careful not to run too large of an external cylinder because the hydraulic reservoir on these machines is not very large. Some models came with another lever which operated the two-point hitch. These models may have a larger reservoir. An innovative person might be able to incorporate an auxiliary reservoir if necessary. Hope this helps, Wally
    Dennis wrote on Sunday, May 21, 2000 (PDT):
  • I have a good friend that said that farmall made a Super C one row cotton picker. If there is such an animal, could you tell me more about it and where one, might be purchased. This request made on May 21,2000
    Bob Pardee wrote on Tuesday, May 16, 2000 (PDT):
  • I recently purchased a 1948 C. It is in pretty good condition, and had the wide (adjustable) front end, as I had hoped to find. I am looking for fenders in reasonably good condition, but am as broke as anyone restoring a tractor. I am also under the impression that the C was available at some point with hydrolics. To what extent? What year(s) were they available. Were they live? Any information would be much appreciated
    Chris wrote on Sunday, May 07, 2000 (PDT):
  • I have a Farmall C, looking for information on how to mount a International C3 finish mower.
    Phill P. wrote on Saturday, April 29, 2000 (PDT):
  • Looking for Carb. for 1952 Super C. I is a Carter UT. Any help appreciated.
    JOHN M. STONEBURNER wrote on Saturday, April 22, 2000 (PDT):
  • OUR DAD BOUGHT A FARMALL SUPER C ABOUT 1950 OR 1951 WHEN HE TRADED IN HIS DAD'S FARMALL H. WE NOW HAVE AN IH 414, 450 AND A 1066. WE HAVE HAD 3 OTHER FARMALL H TRACTORS IN THE PAST SINCE DAD DIED, BUT HIS SUPER C WILL BE A PERMANENT TRACTOR ON THIS FARM AS LONG AS WE LIVE. THIS FARMALL SUPER C TRACTOR MAY NOT BE ABLE TO PULL A 5 BOTTOM PLOW, RUN THE HAYBINE OR ROUND BALER, BUT THESE OTHER TRACTORS JUST DO NOT HAVE THE ABILITY TO EASILY JUMP ON THEM, PULL THE CHOKE & STARTER AND BE ON THE WAY TO CHECK ON SOMETHING ON THE WEST 40, PULL A WAGON AROUND AND SPOT A PIECE ON EQUIPMENT PRECISELY WHERE YOU NEED IT. THESE OTHER TRACTORS OF OURS DO NOT START AS EASY WHEN THE TEMPERATURE IS 10 DEGREES BELOW ZERO, AND YOU JUST DON'T HAVE TO WORRY AS MUCH ABOUT HOW CLOSE YOU ARE TO A BUILDING BEAM WHEN WORKING INSIDE, BECAUSE YOU ARE UP HIGH ENOUGH TO SEE EVERYTHING AROUND THE TRACTOR. THIS SUPER C HAS BEEN REBUILT BY US SEVERAL TIMES OVER THE YEARS AND WE HAVE ALSO ADDED THE IH FIRE CRATER PACKAGE WHICH INCREASED THE BHP CONSIDERABLY. BEFORE WE ADDED THE OTHER LARGER TRACTORS, WE WERE PULLING AN 8' DISK WITH CULTIPACKER AND HARROW BEHIND WITHOUT OVERLOADING. THIS ALSO ALLOWED US TO PULL 2 16" PLOWS IN 3RD GEAR UP MOST GRADES WITHOUT DOWNSHIFTING. I PREFER TO USE THIS TRACTOR TO MOW WITH DAD'S OLD 25V SICKLE BAR MOWER SINCE I DESIGNED AND BUILT A SUBSTITUTE "D BAR" HITCH TO MAKE THE CONNECTIONS AS IF IT WERE A FARMALL H. I ALSO USE THE IH TOUCH CONTROL HYDRAULICS TO LIFT THE 7; MOWER BAR. LONG LIVE THE FARMALL SUPER C TRACTOR, IT IS NOT ANTIQUE, IT IS A FRIEND. THANK YOU JOHN M. STONEBURNER
    Andy Pridham wrote on Friday, April 21, 2000 (PDT):
  • I have a 49 and a 51 C. The 51 was my grandfathers and I have it prety much back to original. I put a C-153 combine motor in the 49. Just had to drill the crank for a pilot bearing, make and exhaust header and cut the intake to move the carb closer to the engine block for hood clearance. Great swap, now runs 41 hp and pulls much better. Anyone done this swap before. Would the original 123 cam shaft work in the 153? If so would it provide more torque? The 153 revs higher but suffers on the bottom end. Goal is to get it to the 2500 lb mofified class. Almost there. Anyone put a turbo on something like this? If so what size? I've got 16.9 X 26" on the back with custom hubs and tin rims. Any info back would be appreciated.
    Brent Pistole wrote on Saturday, April 08, 2000 (PDT):
  • I own a 1949 Farmall C. I also have pull type Little Genius 8 plow. I would like any information or pictures that anyone has of the plows because I would like to restore it. Any links to the internet would help also.
    bryan dosier wrote on Sunday, April 02, 2000 (PDT):
  • i have a "c" model i bought several years ago.it quit on me awhile back.i am looking for copies of owners manual& or shop manuals for it.i would really like to get it going again.thanks for any info
    Steve Pfennig wrote on Thursday, March 23, 2000 (PST):
  • I drove this actual tractor when I was 10-ish. What a beautiful restoration job. These tractors seem to provide a lot of people with many good memories. I sure hope to create some more in the future on this one.
    Don Harrington wrote on Sunday, March 19, 2000 (PST):
  • I have a Farmall C, but don't know what year. I need a wiring diagram. Does anyone know where I can get one?
    Andrew wrote on Saturday, March 18, 2000 (PST):
  • I've just bought a 1954 Super C. It's in good condition. But it does need a little work. I'm looking for lights, and misc. other parts. I would appreciate any information. Thanks!
    don wrote on Saturday, March 18, 2000 (PST):
  • have almost finished with my 450, how big is a "C"
    jerry wrote on Friday, March 17, 2000 (PST):
  • My grandfather had one it was a 1950 I think. he got it new and worked it on his farm untill he pasted away in 1971. the old tractor was then sold I have been looking for it for years now. I hope that one day I can find it and bring it home.It was the first thing I every drove. jerry Edinburg Va.
    Pat Mc wrote on Friday, March 17, 2000 (PST):
  • I can't get the lights to work on my "C". Is there an electrical diagram available?
    Dave Garris wrote on Saturday, March 11, 2000 (PST):
  • I just picked up a farmall was told by previus owner that it was a super c.Not sure if it is a super c or just a c, also not sure of the year.The plate below the seat has model -fc serial no.is in151,000's.If would be greatly appreciated if you e-mail me with some imformation on the year,model and a place to get afew parts and a good service manual and a good,complete set of stickers so I can restore it back to original.Email me at buckjr at mail.uplink.net
    Joe Witt wrote on Saturday, March 04, 2000 (PST):
  • I have a 1948 c farmall with fenders and three point and with a new paint job. Runs good would like to sell for $1500
    G.L. TAYLOR wrote on Saturday, February 12, 2000 (PST):
  • I NEED A HOOD FOR A 1950 SUPER C.ALSO HOW DO I CONVERT BACK TO A SIX VOLT?
    DEAN HLAD wrote on Wednesday, February 09, 2000 (PST):
  • I'm restoring a 1950 Farmall C. The tire size is 12.4 x 36 (11 wide rim). Apparently the tractor was used heavily for cultivation and they put calcium in the rear tires. The problem I have is that from sitting all those years the calcium leaked and has caused severe rust around the valve stem area. I need to cut the area out and replace it with new. Wondering if anyone out there has a salvage rim they would be willing to sell an 20" chunck out of for me to "graft" in the new area. Would be willing to pay the cost and shipping. Please e-mail or call meat 940-627-1785. Dean Hlad Decatur, TX
    Brian Houghton wrote on Saturday, February 05, 2000 (PST):
  • To Greg Kneifl,your tractor is a 1950.Farmall came out with this special promotion in 1950 that let farmers try{demonstrate}these tractors.I have a farmall c demonstrator that I am restoring now.As for the value of a demonstrator,#1 depends on how many of these tractors are in your area.#2 depends if it was a demonstrator,some people just painted there tractors with thinking they would be worth more white because of this.#3 you could not put a price high enough to by mine.My tractor was bought from a farmall dealer in 1952 by my uncle.he couldn't bring it home until the dealer repainted it red. The red paint pealed off and is mostly gone and now it is red,white and rusty.The pricing of a tractor like this is all how much your tractor is worth to you.In Guy Fay's book FARMALL LETTER SERIES it tells you a little on this subject.Good luck
    Brian Houghton wrote on Saturday, February 05, 2000 (PST):
  • To Greg Kneifl,your tractor is a 1950.Farmall came out with this special promotion in 1950 that let farmers try{demonstrate}these tractors.I have a farmall c demonstrator that I am restoring now.As for the value of a demonstrator,#1 depends on how many of these tractors are in your area.#2 depends if it was a demonstrator,some people just painted there tractors with thinking they would be worth more white because of this.#3 you could not put a price high enough to by mine.My tractor was bought from a farmall dealer in 1952 by my uncle.he couldn't bring it home until the dealer repainted it red. The red paint pealed off and is mostly gone and now it is red,white and rusty.The pricing of a tractor like this is all how much your tractor is worth to you.In Guy Fay's book FARMALL LETTER SERIES it tells you a little on this subject.Good luck
    John F. Kenney wrote on Friday, February 04, 2000 (PST):
  • In reference to the differance between the Farmall "C" and Super "C" ; the "C" had a 113.1 Cubic inch displacement engine and Super "C" had a 122.7 Cubic inch displacement. The RPM was rated the same according to an IH referance book I own. Both "C" and Super "C" were available with Hydraulics.
    Wally Pfennig wrote on Wednesday, February 02, 2000 (PST):
  • Your white 'C' is actually considered a "demonstrator". The original "Farmall" decals were "stenciled" (the letters were individually cut) so the white between the letter on the decals would be visible. Decals from the CaseIH dealer will have a red background, but it will still look ok. The one's I've seen restored use these same decals. Decals from Surplus Tractor Parts will have a clear background and the effect will be identical when they are applied. FYI, Certain items on these "demonstrator" 'C's, such as air cleaner assembly, etc were painted red. I'm not sure which parts were red and which were white though. Also, it is possible to determine the year of your tractor from the serial#. As far as value goes, it is my observation that condition is always the greatest factor in an antiques value. I am not aware of any premium paid for "demonstrators" versus regular 'C's.
    wrote on Tuesday, January 18, 2000 (PST):
  • I AM LOOKING FOR A SUPER C FARMALL
    Lee Smith wrote on Sunday, January 02, 2000 (PST):
  • Anybody know where a guy can find a block for a 1950 farmall c ? At a fair price of course...
    Kenny Christoperson wrote on Thursday, December 30, 1999 (PST):
  • HI,i would like to know where all of the decals go on the farmall c,i have a 1950 farmall c and i have the hood painted,and the hood decals on,but i need to know where all the other decals go.
    john clinch mcallister wrote on Wednesday, December 01, 1999 (PST):
  • my father inlaw restored a 1949 farmall c and i need the stickers for it where would i get them
    E.P. Lyon wrote on Tuesday, November 30, 1999 (PST):
  • A beautiful restoration! I own and operate a 1956 200. It appears identical to the C. Are there any notable differences?
    kelly wrote on Tuesday, November 23, 1999 (PST):
  • I am also 17 years old and own a 1950 'c' the only difference between a c and a super c is that there is a water pump on it and it has hyd. It has no difference in engine size it just runs 400 rpm's faster.
    kelly wrote on Tuesday, November 23, 1999 (PST):
  • I am also 17 years old and own a 1950 'c' the only difference between a c and a super c is that there is a water pump on it and it has hyd. It has no difference in engine size it just runs 400 rpm's faster.
    kevin wrote on Sunday, November 21, 1999 (PST):
  • i am restoring a 48 c s/n around 20000 i was wondering besides the engine size what is the deff.; between a c and a super c . I thought it was a super when it had hyd. Also i would like a wide ft. mend but after driving a narrow i kind of like the ease and way it turns so sharp. Any good tips?
    DUSTIN NEWBY wrote on Monday, November 15, 1999 (PST):
  • I am 17 years old an I own a 1952 Super C I restored it when I wwas 13. My Father and Grandfather are farm mechanics. We also own two JD A's one B a 40 a MT and a L. We have a Ten caterpillar. Farmmal A and B. And one WC Allis Chalmers. Have Any Questoins Or need help locating parts E-mail me. I love working on and talking about old tractors.
    RALPH CHRISTIANSEN wrote on Friday, November 12, 1999 (PST):
  • I AM IN THE PROCESS OF RESTORING A 1948 FARMALL C, AND LOOKING FOR INFORMATION ON RESTOREATION,AND ACQUIRING PARTS.


    Use This Form to Add Your Own Comments or Questions

    Your Name:
    E-Mail:

    [Return to the Shed]



  • SHOP  FOR  PARTS SHOP  FOR  MANUALS
    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums


    Copyright © 1997-2016 TractorShed.com

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.