|
Do you have any comments or questions about this tractor? Ever use one?
Know anyone who owned one? If so, please join in on the discussion below.
Use the form for entering your comments.
Comments on this Tractor
Kendall S Lola Moseley wrote on Tuesday, August 08, 2023 (PDT):I have a T20 IHC crawler that my dad bought new in 1935 or 6. I restored it and it is in excellent condition. My kids have no use for it and thinking of selling it. Anyone interested Can provide pictures and video of it running.
Carlos Guajardo wrote on Monday, August 15, 2022 (PDT):Own a 1939 International T20, would like to know if I have a bad hydraulic break unit since the TracTractor doesn t turn right. If so, how do I get to the Hydraulic break to fix- thru the rear plate, maybe Any other reason why the dozer wouldn t turn. turn left is fine.
Augie Leonard wrote on Thursday, October 24, 2013 (PDT):Hello, Would like to know if the T20 s have Hydraulic remotes on them. thank you, Augie
EddieBrowder wrote on Monday, April 15, 2013 (PDT):I bought a T20 1935 under carnage great was running 5 years ago. But I need hood grill pallets to make original complete it has wrong parts for what I,need to be original I want to restore this tractor origins. If any one can help email please.
Darrell Judge wrote on Sunday, November 06, 2011 (PST):I would like to buy a gas tank in good shape for a 1935 T20 at a reasonable price.
Chris Edy wrote on Tuesday, October 25, 2011 (PDT):Selling a T20 1936 for parts Engine No good Tractor was used very little before it blew a rod Tracks and trans in greate shape
Tom Donnelly wrote on Friday, September 30, 2011 (PDT):I have a 1938 T20 with woods blade ,never been left out side,runs very good. I would like to sell with manuals and lots of parts. I am in upstate N.Y. tdonnelly at fairpoint.net
Tom Donnelly wrote on Friday, September 30, 2011 (PDT):I have a 1938 T20 with woods blade ,never been left out side,runs very good. I would like to sell with manuals and lots of parts. I am in upstate N.Y.
Terry Parsons wrote on Friday, July 29, 2011 (PDT):looking fore water intake manafold frome the radeator to the motor also intake and exaust manafold . I need it for a T-20 that was damaged during dalivery to me .
Linda Ross wrote on Saturday, May 21, 2011 (PDT):Have inherited an old McCormick-Deering Trac Tractor, not sure of the year in the late 30 s, I think..would like to sell to get it a home..Interested please respond. thanks and God Bless..located in Washington state....
michael painter wrote on Thursday, May 20, 2010 (PDT):I m trying to locate a T-20 that came from the state of California had a brass plate on it and a rear pto , painted dark green with a brass fire extinguisure, with excellent undercarriage, but only about 45% grouser shoe track life left. Came from Cali. then went to Defuniac Springs, Fl. and then was traded for a running Caterpillar D-6 generator/engine up in/near Virginia ... sure would like to find it and purchase it or any other T-20 that is in running condition ... Thanks for any leads/help ...
BLL wrote on Thursday, August 27, 2009 (PDT):Have a 38 t-20. Looking for another in the new england area. Would also be looking for a f-20 as well. Manuals too.
Kirk C. wrote on Monday, April 13, 2009 (PDT):Ive got a friend with a T-20, its got the Bucyrus-Erie dozer blade on it, he said it was last run in 59, or there after, Its all there except for the side curtains on the hood, seat cusions gone but other than that, i think it d be a simple redo,
S.Cameron wrote on Thursday, December 04, 2008 (PST):Have a 1935 T20 which has been in the family since new. Runs beautifully and has recently taken part in the world record attempt to have as many crawlers working in a field.
Allan Greer wrote on Thursday, April 10, 2008 (PDT):I used to have t20 tractractor. worked reel good. hard to find parts for. steering clutch used to stick often.work good in bush pulling logs. Great fo moving snow, And was good in mud. Crankshaft broke, and sold it to international deeler ,to restor it. great machine .
Rod Burgett wrote on Monday, March 03, 2008 (PST):Hi my name is Rod looking for a super W-6.
Rob wrote on Monday, February 04, 2008 (PST):Found TD-20 I think in the bushes. Been rusting for quite a while. Missing the engine cover panels. Carburetor busted at connection point ice/thaw for 20 years . Could push a finger through the valve cover. Tracks/undercariage controls look viable. Radiator looks good. Looks like it s full of parts for anyone willing to pull it apart and clean all the rust off... Just bought a 1952 Cat D2 - So I can part with the TD20 for a fair offer. Near Abany NY. -Rob
Chris Edy wrote on Sunday, January 27, 2008 (PST):I am looking for information; I have a Mccormick T20 The left control lever will not relese the Left track Brakes work fine Somtimes it will releice the left track but seems to stick most of the time Does anyone have a sujestion I have clened the brake disks on the back. cedy at sonic.net
Don Evans wrote on Friday, December 28, 2007 (PST):Looking for T-20 parts; Hood Rt. and Lt. side panels Seat Radiator filler cap Exhaust manifold Linkage below manifold Hand brake Drawbar hitch
Mike wrote on Sunday, December 23, 2007 (PST):I have at-20 and a friend installed a fly wheel and starter that works great. It s called the Mobaum starter system.
DAVE FULKS wrote on Sunday, October 15, 2006 (PDT):IAM LOOKING FOR A GOOD IMPELLER SHAFT OR A GOOD WATER PUMP FOR A 1931 T 20 ALSO FENDERS.
nick wrote on Tuesday, August 15, 2006 (PDT):how much does it weigh?
wrote on Saturday, August 12, 2006 (PDT):
Merv McNally wrote on Saturday, August 12, 2006 (PDT):I have a 1936 T20. I am looking for someplace to purchase parts.. The part I need most is the intake and exhaust manifold. Can anyone help me find this part?
Richard Wilson wrote on Thursday, April 27, 2006 (PDT):My father had a 1936 T20. A good many years ago, he sold it to a collector. This was during the mid 70's. It started and ran well. Several months ago, I found a series of photographs of the crawler from various angles and have been unable to find them again. This machine had a foot clutch. I am curious as to whether all T20's had this. What years were they made?
Chris edy wrote on Monday, April 17, 2006 (PDT):FOR SALE 1933 McCormick Deering T 20 crawler Runs nice, only missing Hood sides Very strong non smoking engine Photo on request
Mike Daigle wrote on Saturday, December 24, 2005 (PST):1932? T20 crawler for sale. Not running. New fuel tank, and radiator. Under carriage good. Original hand crank.
Chris Edy wrote on Thursday, November 24, 2005 (PST):Does anyone have the paint Code for the T20 Red ? What is a good running All compleat nice under carriage T20 Low Hrs Worth
Chris edy wrote on Friday, November 11, 2005 (PST):Hi Can somone that knows about the T20 let me know how hard it is to get parts for a T20 Engine rebuild parts Engins track parts Thank you
Doug Immoos wrote on Sunday, November 06, 2005 (PST):I have a 30's T-20 and I am getting ready to pull the head off. I would like to find a gasket set before I do. If anyone knows where I can get one, please let me know. Or maybe another motor, this one has frozen up on me. Thank you.
RolandP wrote on Monday, September 12, 2005 (PDT):I have a t20 crawler for sale. Its for parts only. I dont think its worth rebuilding. Its in central KS. Email for pics
Joe Mercier wrote on Sunday, April 17, 2005 (PDT):I have a T20 tractor that I am selling. The left steering clutch is stuck and the motor is froze. The tracks are in good shape and the rollers are good. I also have a parts chaisse. Thanks.
Robert Brown wrote on Sunday, March 27, 2005 (PST):I have two t-20's. One has a wide track and the other has narrow track. One is complete and the other is for parts. Have new rollers also. I guess I am going to sell both. I don't know what to ask. I thought I would have time to restore them, but you know how that goes. I am in okla and would like to have a super 88 oliver or another oliver or trade? Any one know what I should ask for them. The one complete is not stuck, just needs a good home. E-mail me at Fountain38 at aol.com Or 918-232-8987
richard j. wilson wrote on Monday, September 27, 2004 (PDT):In regards to the mid 1930's T20 my father had, it was traded to Lloyd Harkins (a collector of about anything) of Siver Star, Montana. He is an elderly gentleman now and may still have it. If interested, contact me and I will forward address and phone of Mr. Harkins
richard j. wilson wrote on Friday, September 24, 2004 (PDT):My father had a T20 crawler I believe to have been made in the mid 1930's. It was in great mechanical shape and used once in a while until the mid 1970's and was traded to a collector. It was the only T20 I've seen. I don't know if all models were the same, but this one had a foot clutch. I am curious to know if this was rare or they all had foot clutches. Thanks.
Rick Peterson wrote on Wednesday, August 25, 2004 (PDT):I'm looking for a T-20. Is there anyone out there that might have one? Thanks.
Rene Chaput wrote on Tuesday, July 06, 2004 (PDT):Hi, I also have a 1937 T-20 SN11176. It is complete, excellent working condition and has the original paint job and decals.My dad purchased it used in 1952 when I was only 5 years old. It is now mine. I have a small hobby farm and use it to pull stumps and push snow in winter. It's a great little "Kitty".
Gary Myers wrote on Wednesday, April 21, 2004 (PDT):I have a T20 for sale. I know nothing about it. It was in an estate cleanup.This has a B.E. Bullgrader hydraulic blade. The hood is missing. Both steering clutch levers move,shifter won't. Engine turns by hand.Best offer so far $300. Any questions 740-745-5801
C Clark wrote on Sunday, January 11, 2004 (PST):Looking at buying one of these. Does anyone know the weight?
MIKE GUILLORY wrote on Wednesday, December 17, 2003 (PST):looking for parts for my T 20. also is it true that the f20 and the t20 has the same motor?
Maria Haaby wrote on Sunday, November 30, 2003 (PST):I have a McCormick Deering T-20 listed on ebay. To see it go to cgi.msn.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2577550655&ssPageName=ADME;B;LC;US;1 Is anyone able to give us information on the year of this crawler? Serial # ST 7871
Merv..Hilliam wrote on Wednesday, November 26, 2003 (PST):Hi, Iam restoring Two[2]McComick Deering T-20's and want to know what year they came out in? My farther had one when I was a littel boy. Also I have picked up the old Farmall-20 that my Uncle had too..The only Number I can find on the F20 is 141312..Merv.H
Dwight Giles wrote on Monday, November 24, 2003 (PST):I have a 1934-35? T-20 that I have been working on for about five years. Engine is done, transmission through steering clutches gone through, presently working on left side final drive and undercarriage. I am, however, confused by the serial number, 2772 HA/5, on the engine which would indicate a 1934 TracTracTor with engine component casting dates of 3-22-C and 6-8-C which would indicate 1933 castings. The problem is that the casting dates on the frame and gear cast housing are 7-29-35 and 4-26-35 indicating parts cast in 1935. The serial number plate was missing on this TracTracTor. Any comparisons of other T-20 serial number and casting dates would be appreciated.
John Hayse - Hayse Bros. Ranches wrote on Wednesday, November 19, 2003 (PST):We have a 1931 T-20 and we are 2nd owner of this tractor. Ours has always been inside, low hours on engine & runs good. We also have hydraulics, chain driven pump mounted above p.t.o. -- Ours spent most of its life working local vineyards, but we only use a few hours a year. We are I.H.C. crawler people. Use TD-6, TD-9, TD-9B, TD-14, TD-15 and 3 TD-18' Lighter & faster than Caterpillar!
Brian wrote on Monday, October 27, 2003 (PST):I just got a T-20 of my own...engine is froze, but it is 99% complete, and has a "new" set of tracks. Has a (aftermarket) Bucyrus Erie blade setup. the blade is missing, but everythink else is in tact. I'm looking for any source for information and or parts. I have a few #'s off the engine..2377DA & 2378DA any ideas? What is the value? Year of Manufacture?
Nelson Hardy wrote on Sunday, October 26, 2003 (PST):1937 T-20 Awsome little crawler, I've got mine fitted with a 7 foot blade a great snow pusher . I have a good set of 16 inch track both sides of running gear some parts usable some not. also parts crawler no motor good contact for magneto parts also I have some misc. parts
Terry Cottingham wrote on Monday, June 23, 2003 (PDT):I have been looking for a T-20 hood and side curtains for years to finish the restoration on my grandfathers 1935 T-20.If there is anyone who can help let me know.I live in central Il.I would be willing to purchase parts tractor that is relatively close. or seperate.Tired of looking,cash waiting.
Winslow Jones wrote on Saturday, August 24, 2002 (PDT):My dad owned one of these tractors in the late '30's. I would dearly like to have some pictures of this tractor and be put in touch with someone who could lead me to more pictures of McCormick equipment of that era.
dON wrote on Sunday, August 18, 2002 (PDT):Looking for a working mag for this cat. Also what is the weight of this cat? would a 2 axle trailer haul it a few hundred miles?
Brian Waselus wrote on Saturday, March 02, 2002 (PST):I have 2 T-20's one dismantled with alot of the parts sand blasted and primered the other one is only good for parts it also includes a heavy duty blade hydrolic pump and cylinders. Both sets of track are in great shape. The radiator gas tank and hood is all it pretty good shape as well. I am interested in selling them.
Lewy wrote on Sunday, February 10, 2002 (PST):I also have a T-20 restored; Also a lowseat T-20, being restored. Just bought a wide gauge T-20 , Have one otherT-20 for parts . The T-20 i have restored was in ANTIQUE POWER. Yours also looks good .
Terry Johnson wrote on Friday, February 01, 2002 (PST):I have a web page dedicated to T-20s. Neat little crawler! home.earthlink.net/~tjohnson2/_wsn/page3.html
Chuck Thomas wrote on Friday, October 19, 2001 (PDT):I just picked up a '35 T20 to clear some brush and put in some trails at my remote cabin site in Alaska . It runs but needs The Exhaust stack and some work on the Cleats . Does anyone know if there is a reprint of the shop manual available for these and how dependable they are or what could be weaknesses . I got one for parts but it doesn't have the stack .
George Leuci wrote on Monday, October 01, 2001 (PDT):I am looking for a t20 , running condition. also know where there are parts.
Alton Howell wrote on Thursday, August 23, 2001 (PDT):Hi, I have a T-20 Crawler,,, needs motor... wanting to sell for parts... asking $500.... Idaho... 208-683-2909
Dave wrote on Wednesday, April 04, 2001 (PDT):I was wandering if any one out there knows were I can find any part for a T-20 in the eastern pa I neeed parts to the left side of the drive if any budy has any info or advice please e-mail me thanks
Bill wrote on Friday, March 16, 2001 (PST):I have a 1937 T 20 in good condition but the right steering clutch is stuck together and won't release. How is the best way to get it loose?
Lee Peacock wrote on Thursday, August 24, 2000 (PDT):I have two T20 one is parts one TD35 as a parts tractor and a TD40. I don't know the years .the serial no should get the year if I can fiend the place to go to
John Cotton wrote on Wednesday, August 23, 2000 (PDT):I really like the T20 in the picture. I have a TD40 it is running on gasoline and we will soon try her on diesel. The engine is in good order but tracks and rollers will need some work I will get new panels and hood made a coat of paint and she'll be like new. Is there any other sites on these tractors I can't find any.
Buck Gum wrote on Friday, August 18, 2000 (PDT):i have a 1935 t20 trac-tractor serial #st 7423, fully restored,all but side panels. i have extra radiator and water pump, will sell or trade. Buck
max wrote on Sunday, July 16, 2000 (PDT):A friend of nime had a T-20 in the early '60s. I could see the remains of the decals on the hood, which read [TRAC TRACTOR]
Robert Brown wrote on Thursday, June 22, 2000 (PDT):I just purchased two T-20 crawlers. One was complete and the other I purchased for parts. It has been partially dissasembled, mostly just the engine is out and torn apart. I have always wanted a crawler, but I don't know much about them. I gave 1000 dollars for both and figured that was a fair price. I don't think it will take much to get the complete one running, or so I hope. If any one has any advice on these tractors, let me know. My past experiences have been with orange tractors, so I am now a "Binder" owner. Thanks
Steve Longstreth wrote on Saturday, June 17, 2000 (PDT):Hi A friend of mine has a 1935 T-20. He is trying to find a track tightener assy right side or another T-20 if someone can help I would gratefull Thanks Steve
Steve Longstreth wrote on Saturday, June 17, 2000 (PDT):Hi A friend of mine has a 1935 T-20. He is trying to find a track tightener assy right side or another T-20 if someone can help I would gratefull Thanks Steve
Mark Foster wrote on Thursday, March 30, 2000 (PST):Hi i am restoring one of thease at the moment.Thay seem to be week in the final drive as i have pulled 3 appart looking for the same parts.Iam still looking for final drive pts. Iam making new liners at the moment what a big job glad it,s not v12 mark
Mark Foster wrote on Saturday, March 25, 2000 (PST):WOW Ihave wrecked 3 of thease tractors and Iam still looking for the same parts.I have been at it for 4 years Ineed final drive parts housings etc it appears to be a week point here . Thay used them here for ttansport in the wet in the sandy semi desert country.Which means perfect grouser plates and very worn track chains.But i have a good set now .I Have just about finished the tin work 90% new now.The next job is to make new liners for the motor.Gear box clutches,acc all done. T -20 PARTS ARE MADE OF UN-OBTAINIUM HERE so i spend most of my time making parts . thanks mark
Karl Siczek wrote on Thursday, March 23, 2000 (PST):I am looking for information on the IHC Model TD14A specs. such as years built, horsepower rating, and any other per- tanent information. Thanks.
Mike Schmidt wrote on Tuesday, March 07, 2000 (PST):I have a 1937 just like the one in the picture with some added extra's. We currently use it for landscaping, plowing, and woods work. My dad and I like to go to all the tractor shows in our area, and have seen several in Wisconsin. We also are looking for parts all the time. If you have any leads, please let us know.
Tom Seegmiller wrote on Saturday, February 19, 2000 (PST):I have a 1936 t20 It has a td6 dozer frame and rear winch and runs great.I use it to cut roads and home pads on the mountain I'am short the hood sides panels
Wayne Becque wrote on Monday, February 14, 2000 (PST):I have a 1933 model year of this machine. Mine runs well and I use it around the farm, but it don't look as pretty as this one in the picture. ;o) Mine was converted to electric start at the power take-off.
zack lacenski wrote on Monday, February 14, 2000 (PST):My dad has a T-20. The other night I was driving it around until 9;00. We take it in the woods when we make firewood, and nothing works better.
Lance C`uda wrote on Sunday, July 25, 1999 (PDT):To whom it might concern, the tractor in the photo is a very good looking restored crawler. I also have one of these tractors.Mine is a 1935 T-20 but Iam missing a few pieces to get it going 1 is the starting hand crank the other piece is the exhaust manifold on mine is broken into several pieces and I cant find another one around my area (Washington St )if anybody has any of these extra parts or leads on any I would sure appreciate it.
[Return to the Shed]
|
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We've kept the same low rate for six years. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. |
|
